9.2.6.Setting the SC RELAY PCB and HDD Hold Plate
1.Set the SC REALY PCB to the HDD Hold Plate, and fix it using two Screws <N2>. No.1, No.2
2.Fix the HDD Hold Plate to the MAIN HIGH PCB using the two Screws <N4>. No.3, No.4
3.Connect the FFC to the Connector(CN6503) and paste the Tape.
| SC RELAY PCB |
HDD hold plate | <N2> |
|
<N4>
:No.1
CN6503
<N4> :No.2
Tape
FFC
Screws <N2> : DFHE5122YA
Screws <N4> : DRHM0093ZA