Matsushita CF-W4GWCZZ Remove the Drive Unit, Remove the Antenna BoardL,R, Remove the USB Board

2.2.12.Remove the Drive Unit

Preparation : perform the section 2.2.1. to 2.2.3. first.

1.Peel off the Tape from the Connector.

2.Remove the Drive FFC from the Connector (CN501) and remove out the Drive Unit.

Tape

CN501

Drive unit Drive FFC

2.2.14.Remove the Antenna Board(L,R)

Preparation : perform the section 2.2.1. to 2.2.10. first.

1.Remove the Antenna Cable (L, R) on the Wireless LAN Module and then remove the Antenna Board from the Bottom Case.

2.Remove the DC-IN Cable (CN600) from the Main Board.

Antenna PCB (L)

Antenna Cable (R)

Antenna Cable (L)

CN600

Bottom Case DC - IN Cable

2.2.13.Remove the USB Board

Preparation : perform the section 2.2.1. to 2.2.3. first.

1.Remove the Connector (CN23) on the Main Board.

2.Remove the USB Board from the Bottom Case.

CN23

USB Cable

USB Board

2.2.15.Remove the Wireless LAN Module

Preparation : perform the section 2.2.1. to 2.2.3. and 2.2.10. first.

1.Peel off the Tape on the Wireless LAN Module.

2.Open the Wireless LAN Module maintenance arm and remove the Wireless LAN Module.

Tape

Wireless LAN

Module

Main Board

2-8