Matsushita CF-W4GWCZZ service manual Modem Cable, Rib and LAN Cable processing, Pet, Lan

3.8.MODEM Cable, Rib and LAN Cable processing

Conductive Cloth affixation of Modem Cable

Wrap Gasket Cloth.

13mm

Modem Cable

Gasket Cloth

Tape is wrapped

Tape

Standard size 8mm

0 1mm

Process under		Process the cable so as not to
the pin.		come in succession.
Do not get on up.			Peel off the both sides tape
Process the remainder
			flaking off paper and then
between the pin and the pin.	Touch the pin.		fix to the cover.
Process at the			MODEM
right of the pin.	Pin
Do not get on up.			Shut the cap.
	Pin
Touch the pin.		PET
			Install connector in bottom.
		Tape

Process the cable to the cutting lack part.

Process between the Main Board and the Pin. and do LAN Cable up.

(Prevent from floating by Modem Cable.)

Process the Modem Cable to the cutting lack of the Board.

	LAN
PET	Draw out RJ cable
Tape	straight.

	Divide the cable into the center
Pin	and paste the tape vertically.
	Paste the remainder to an opposite side.

Main Board

LAN Cable

Modem Cable

3-7