Matsushita CF-W4GWCZZ service manual Specification of affixation of PET tape to Heat Spreader

3.15. Specification of affixation of PET tape to Heat Spreader

<The Main Board Side>

Heat Radiation Grease(G-751)

Spread with a treatment device.

Heat Spreader

1~2mm

The extent that length remains pastes on an opposite side.

The extent that length remains pastes on an opposite side.

PET Tape

1~2mm

<The Back Completion Chart>

PET Tape

Never touch the aluminum edge part directly by bare-handed when the part of aluminum with a thin all surroundings bends. Correct in that case with a radio pincers etc. and instal.

3.16.Affixation of Win Logo Label (XP), CENTRINO Label and ENERTGY STAR Label

Win Logo Label (XP)
2	5mm

CENTRINO Label

In Win Logo Label / CENTRINO Label / ENERGY STAR Label Affixation inclination, the both ends difference is within 0.2mm.

			2	5mm
	0	1mm	ENERGY STAR Label
5	7mm	2	5mm

3-13