Marshall electronic V-R241-DLW manual Wave/Vector Submenu, Waveform Mode

Page 27

The EIA-608 caption protocol can define the color for the closed caption text. Use this setting to choose between using the color defined by the data stream or to override this data with any of the selected colors.

The default setting for option is Auto.

■708 Color

The EIA-708 caption protocol can also define the color for the closed caption text. Use this setting to choose between using the color defined by the data stream or to override this data with any of the selected colors.

The default setting for option is Auto.

Wave/Vector Submenu

Use the Wave/Vector submenu to change the location of the Waveform Monitor and Vectorscope, as well as the data displayed on the Waveform monitor or the Vectorscope on the V-R241-DLW monitor. The Waveform Monitor can also be customized to conform to different scales, to display different colors, differentiate data with Limits. The Vectorscope targets can also be changed in this menu.

■Waveform Mode

This option allows you to choose between different layouts for the Waveform monitor. Available options are YUV Parade, YUV Overlay, RGB Parade and RGB Overlay.

• YUV Parade The Y (Luminance, shown in white), U and V (Chrominance components, U is showed in cyan and V is shown in Magenta) components of the signal are displayed from left to right.

• YUV Overlay

The YUV components of the signal are overlaid.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Model No. V-R241-DLW Operating InstructionsThis page intentionally left blank Contents 1920 x 1200 Full Resolution 24 Panel FeaturesUnpacking Installation and Initial SetupInstallation Connections, Power-On and Initial SetupPower Button Front Panel FeaturesRS-422/485 Serial Interface Rear Panel FeaturesFollowing SDI standards are supported by the V-R241-DLW Compatible Input FormatsDLW Monitor Layouts Waveform Monitor Mode Full Screen Video Mode On-Screen Menu On-Screen Menu Marker Setup SubmenuMarkers Center Marker Marker BackgroundVideo Config Submenu Monochrome ModeBlue-Only Mode Aspect Ratio Settings Pixel-to-Pixel ModeCurtain Color Analog Phase DVI-Analog or VGA input onlyDVI-A CSC Mode DVI-Analog input only DVI-D CSC Mode DVI-D input onlyColor Config Submenu System Config SubmenuHdmi CSC Auto Hdmi input only, via the DVI-I interface User-Definable Function Buttons Saving and Loading User PresetsOSD Config Submenu IMD StateStatus Display OSD Tally LED TallyAnc. Timecode OSD Timeout Audio MonitorCC Monitor Closed Captioning IMD Group # IMD Config SubmenuOverview IMD ID #TSL Tally SourceIMD Fixed Config Submenu Mode ServiceClosed Captioning Submenu IMD Fixed StringWave/Vector Submenu Waveform ModeColorize Waveform Waveform ScaleAncillary Submenu DID/SDID Software Version Display Service SubmenuPanel SpecificationsDimensions Burn-In Warning MaintenanceWarranty Screen CleaningThis page intentionally left blank 2010-1229
Top Page Image Contents