Measurement Specialties PCI-QUAD-AC5 manual Specifications

Chapter 5

Specifications

Typical for 25 °C unless otherwise specified.

Specifications in italic text are guaranteed by design.

Power consumption

+5V

2.4 A typical, 3.6 A max

Digital input / output

Digital type	Digital Outputs - 74S244
	Digital Inputs - 74LS373
Number of I/O	96
Configuration per 82C55A Mode 0	ƒ	2 banks of 8 bits and 2 banks of 4
emulation	ƒ	Each bank programmable as either input or output
Input low voltage	0.8		V max.
Input high voltage	2.0		V min.
Output low voltage	0.5		V max. (Iol = 64 mA)
Output high voltage	2.4		V min. (Ioh = -15 mA)
High level output current	-15 mA max.
Low level output current	64 mA max.
Absolute maximum input voltage	7.0		V max.
Pull-up/pull-down resistors	Locations provided for user installation of pull-up or pull-down
	resistors.
Power on / reset	High impedance

Environmental

Operating temperature range	0 to 70 °C
Storage temperature range	-40 to 70 °C
Humidity	0 to 95% non-condensing

Mechanical

Card dimensions

PCI long card: 312 mm long x 107 mm high x 18.5 mm thick

Main connector and pin out

Connector type	Four, male 50-pin 0.1" spaced double row connectors
Compatible cables	C50FE-x cable
	C50FF-x cable
Compatible accessory products (with the	SSR-PB24 (up to 4, one cable required per PB24 board)
C50FE-x cable)
Compatible accessory products (with the	CIO-MINI50 (four)
C50FF-x cable)	CIO-SPADE50 (four)
	CIO-TERM100 (two)
	SCB-50 (two)

5-1