Turbosound Explore the Features of Home Theater Systems: TA-880H, TA-880L, and TSW-218
Page 12

user manual

TA-880

TA-880L Low Frequency Enclosure

The TA-880L low frequency enclosure covers the low frequency range from 40Hz up to 100Hz. It contains two very high power 15" neodymium drive units loaded with TurboBass™ devices. The TA-880L is a very compact enclosure and its minimal size and low weight ensures easy handling. It is designed to provide beneficial low frequency coupling when used in multiples. The enclosure is designed to be ground- stacked.

TSW-218 Subwoofer

The TSW-218 is designed to cover the sub and low frequency ranges from 25Hz to 160Hz, and can be used as part of a 5-way Aspect system in order to reinforce sub-bass frequencies. It utilises two custom designed neodymium 18” drivers loaded with TurboBass devices. The proprietary loading technique and horn flare design produces significant mutual coupling between adjeacent enclosures, resulting in sensitivity gains of up to 110dB with eight units coupled.

TA-880H Mid/High Enclosure

The TA-880H enclosure covers frequencies above 100Hz and contains a total of five drive units. A pair of 10” neodymium low-mid frequency drivers loaded with TurboMid™ devices covers the frequency range from 100Hz to 400Hz. The low-mid drivers are rear-facing in the enclosure, providing not only additional cooling by placing the magnet/heatsink assemblies in the path of the airflow, but also acting as phase plugs. A specially developed 10” low-mid driver loaded with a LMF Polyhorn™ device covers the range from 400Hz to 4kHz. The remaining frequencies are covered by a pair of 50mm dome drivers loaded with Polyhorn™ waveguides specifically designed for this purpose.

The TA-880H Mid-High Enclosure is designed to provide a precise array angle of 25º horizontal x 15º vertical. This high Q provides the projection necessary for true long throw applications such as large arena and outdoor productions.

TA-880 user manual

Page 12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Aspect TA-880 System TA-880 TA-880 Amplifier Rack Signal Wiring Output Connections TA-880 EC Declaration of Conformity Introduction Turbosound Aspect System ConceptsAspect Polyhorn Concept Aspect TA-880 Turnkey System Concept Loudspeaker Management System LMS Concept LMS-D26/D6 Loudspeaker Management SystemsAmplifier Racks Power Amplifiers Digital ControllersAspect Loudspeaker Components TA-880L Low Frequency Enclosure TSW-218 SubwooferTA-880H Mid/High Enclosure TA-880HM High-Mid Enclosure TA-880LM Low-Mid EnclosureTransportation Aspect trapezoidal Flying System Flying and Stacking OverviewGigmate Acoustic Simulation Running Turbosound GigMate / Ease Focus for the first timeSystem Setup Mapping PropertiesAudience Area RiggingDesigning a system TA-880 TA-880 TA-880 Safety Notes on Rigging Sample Certificate of Load Test Flying Hardware Horizontal CoverageWide and Narrow Flybar settings Vertical CoverageBottom View Two-wide trapezoidal flybar FB-880/2WThree-wide trapezoidal flybar FB-880/3W Short Chain Assembly Flying ChainsFlying Swords 59m Tilting StrapTA-880 TA-880 Flying a vertical column of TA-880 trapezoidal cabinets TA-880 Sword hole position Inter-cabinet angle Flying a cluster of TA-880 trapezoidal cabinets Single horizontal rowWide x 2 deep TA-880H array Wide x 3 deep TA-880H array Tight-packed Flying Assemblies TA-880 Bass Enclosure arraying Aiming directivity of the stackGround stacking Mechanical Installation LMS Series Loudspeaker Management SystemsIntroduction UnpackingLMS-D6 Loudspeaker Management System Mains Power LMS-D6 Rear Panel FunctionsVoltage Settings Safety EarthingAC Power Fusing Powering UpInput and Output Connector Wiring Time correction for loudspeaker driver placementAudio Connections Features LMS-D24 and D26 Loudspeaker Management SystemsFront Panel Functions TA-880 Rear Panel Functions Selecting a Factory Preset Operating the LMS-D24 and D26 Starting upCreating a Crossover A Freq Width Gain EQ1 100Hz 1.4Q 0.0dB Navigation and Viewing ParametersOut1 Freq Width Gain EQ1 100Hz 1.4Q 0.0dB NavigationPresets Preset RecallPreset Name Store My System Preset StoreDSP Processing Layout Input DSP block diagram Output DSP block diagramStereo / Mono Formats A Delay 1.50ms DSP processing Input ChannelsA Freq Shape HPF 20.0Hz LR24 Parametric Equalisation High and Low shelving filtersParametric filters Delay Output Channels Gain and PolarityOut1 Freq Shape LPF 2.50k LR24 High and Low Pass FiltersOut1 Freq Slope Gain EQ- 100Hz 12dB 0.0dB Limiters RoutingUtilities Utility functions Serial Comms Port Audio Output Connectors AMP-890 Aspect System Amplification Rack Racking, Cables and ConnectionsOptions Input ConnectionsAmplifier Rack Signal Wiring Output ConnectionsMid-High Outputs Break-out Cables NL4 bass Break-out cables NL8 mid-high Extension CablesMains Connections T-45 High Efficiency Audio Power Amplifiers General Features & FacilitiesFront Panel Functions T-25 Front Panel Functions T-45 Mechanical Installation Voltage Setting Voltage RangeAudio Connections & Controls Gain and Sensitivity Settings PolarityInput Impedance Attenuation & Gain Setting Damping FactorLong Speaker Lines Cooling SystemAppendix a Technical Specifications TA-880H TA-880HM TA-880LMTA-880L TSW-218 Appendix B Warranty TA-880

TA-880 specifications

The Turbosound TA-880 is a high-performance audio solution designed for professional live sound applications. This arrayable large-format loudspeaker system offers remarkable acoustic power, clarity, and reliability, making it a popular choice among sound engineers and event organizers.

One of the standout features of the TA-880 is its advanced driver technology. The loudspeaker is equipped with dual 18-inch neodymium low-frequency transducers that provide deep, punchy bass and impressive output levels. The high-frequency section is supported by a 3-inch titanium compression driver, delivering crystal-clear highs that ensure speech intelligibility and musical detail, even in large venues.

The TA-880 system employs Turbosound's proprietary Waveguide technology, which enables exceptional dispersion control. This means that the sound reaches the audience evenly, minimizing dead spots and providing a consistent listening experience. The speaker's broad horizontal dispersion pattern allows for wider coverage, making it ideal for various settings, from concert halls to outdoor festivals.

Additionally, the TA-880 features a robust, durable construction that can withstand the rigors of touring and extensive use. Its weather-resistant design makes it suitable for both indoor and outdoor applications, ensuring reliability in diverse conditions. The system is also lightweight, facilitating easy transport and setup, allowing sound professionals to focus on delivering exceptional sound rather than wrestling with heavy equipment.

Integration is made seamless with the TA-880 through its compatibility with Turbosound's proprietary digital signal processing (DSP) technology. This innovative feature enables users to fine-tune the system according to specific venue requirements and performance criteria, further elevating sound quality. It also allows for network control, enabling real-time monitoring and adjustments from a single interface.

The TA-880 system is versatile, suitable for a range of applications including concerts, corporate events, and festivals. It can be used as standalone units or as part of a larger array configured for larger venues. Its combination of high output capability, intelligent design, and industry-leading technology makes the Turbosound TA-880 a preferred choice for those who demand excellence in audio performance.

In summary, the Turbosound TA-880 combines advanced driver technology, innovative dispersion solutions, and robust construction, making it an indispensable tool for sound professionals aiming to deliver an unforgettable auditory experience.
Top Page Image Contents