Philips FW-V520 manual Loading Discs, Disc Playback, Replace discs during playback

CD/VCD/MP3-CD Operation

Loading Discs

1Press VCD to select CD/VCD/MP3-CD mode.

2Press OPEN•CLOSE to open the disc tray.

3Load up to two discs on the individual disc trays. To load the third disc, press DISC CHANGE. ➜ The disc tray will rotate until the empty tray is ready for loading.

DISC CHANGE		OPEN•CLOSE
DISC 1	DISC 2	DISC 3

2	3
	1
	C D C H A N G E R
2	1

4Press OPEN•CLOSE to close the disc tray.

➜"READING DISC" will be displayed. The selected disc, total number of tracks and the playing time will appear on the display.

➜A lighted button indicates that a disc is loaded on the disc tray.

For MP3-CD only

●Load a MP-3 CD format music disc on the disc tray.

➜ The first album number and first title number "A01 T001" will be displayed.

Notes:

–Load the discs with the label side facing up.

–To ensure good system performance, wait until the disc tray completely reads the disc(s) before proceeding.

–For MP3-CD, the disc reading time may exceed 10 seconds due to the large number of songs

compiled into one disc.

Disc Playback

a disc is loaded in the disc tray

the current selected disc tray is empty

the current selected disc tray is loaded or playing

To play all discs on the disc tray

●Press PLAYÉÅ.

➜All the available discs will play once, then stop.

➜During playback, the selected disc tray, track number and elapsed playing time of the current track will appear on the display.

To start playback from a selected disc tray

●Press DISC 1, DISC 2 or DISC 3.

To interrupt playback

●Press PAUSEÉÅ.

●To resume playback, press PLAYÉÅ again.

To stop playback

●Press Ç.

Replace discs during playback

1Press DISC CHANGE.

➜"OPEN" will be displayed.

2To change the inner disc, press DISC CHANGE again.

➜The active disc will stop playing and the disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible.

E n g l i s h

17

pg 001-032/V520/21-Eng 17 12/11/01, 5:05 PM 3139 115 21093