Clock/Timer
●Before setting the timer, make sure the music source has been prepared.
VCD – Load the disc(s).To start from a specific track, make a programme (refer to “CD/VCD/
TUNER – tune to the desired radio station. TAPE – load the prerecorded tape into tape deck 2.
3Press à or á on the system repeatedly to set the hour for the timer to start.
4Press í or ë on the system repeatedly to set the minute for the timer to start.
5Press CLOCK•TIMER to store the start time.
➜"TIMER ON" will be displayed and followed by the set timer "XX:XX" and then the selected source.
➜TIMER 
will remain on the display.
●At the preset time, the selected source will play.
To exit without storing the setting
●Press Çon the system.
To deactivate the TIMER
1Press and hold CLOCK•TIMER for more than two seconds.
2Press Çon the system to cancel the timer.
➜ The display will show "CANCEL" and TIMER 
will disappear from the display.
To activate the TIMER (for the same preset
time and source)
1Press and hold CLOCK•TIMER for more than two seconds.
2Press CLOCK•TIMER again to store the start time.
➜ The last set timer information will be shown for a few seconds and TIMER 
will appear on the display.
Notes:
–If the source selected is VCD, playback will begin with the first track of the last selected disc or other trays if disc is empty. If all the disc trays are empty, TUNER will be selected instead.
–During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.
E n g l i s h
External Sources
|
|
|
| ||
| ECO POWER |
|
|
|
|
/ |
|
|
|
| |
TITLE |
|
|
|
| |
DOLALBUBYM |
|
|
|
|
|
NAMB NRE |
|
|
|
|
|
PBC |
|
|
|
|
|
|
| V | PRESE |
| |
|
|
| T | NE | |
|
| E | ITL | ||
RETURN | P | R | T | E | X |
|
|
| T | ||
| DEMO |
| PLAY• | ||
| STOP/ |
| PAUSE | ||
| CLEAR |
|
|
| |
| S |
|
|
| |
|
| EA AL BUMING | |||
|
| RCH • TUN | |||
|
|
|
| INTERACTIVE VU MET |
DISPLAY PROG | CLOCK• | AUTO | DUBBING REC |
|
TIMER | REPLAY |
| ||
|
| CD 1•2•3 | BAND |
|
| VCD |
| TUNER | MAX |
| PAL/ |
| S O U N D | |
| NTSC |
|
|
|
|
|
| SOURCE | • MAX BASS DYNAMIC AMPLIFIC |
|
|
|
| |
|
|
|
| CONTROL (DAC) |
| TAPE |
| AUX |
|
|
| TAPE 1•2 | CDR / DVD | MIC/ |
|
|
|
| LEVEL |
2Press AUX (CDR/DVD) repeatedly to select CDR/DVD mode or normal AUX mode.
➜ "CDR/DVD" or "AUX" will be displayed.
● If the sound from the external source is | |
distorted, select CDR/DVD mode for listening. | |
Notes: | |
– | You are advised not to listen to and record from |
the same source simultaneously. | |
– | All the navigation sound control features (DSC or |
VAC for example) are available for selection. | |
– | Refer to the operating instructions for the |
connected equipment for details. | |
Listening to External Sources
1Connect the audio out terminals of the external equipment (TV,VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/CDR IN terminals of your system.
For Recording, please refer to “Tape Operation/Recording”.
29
pg | 29 | 12/11/01, 5:06 PM 3139 115 21093 |