Lamp replacement (continued) | CONTENTS |
66
Notes
• | When the CALL button is pressed, the “Lamp | |||
| time” (the approximate amount of time the lamp | |||
| has been used) will be displayed. 40 | |||
• | The lamp should be replaced if the total working | |||
| time exceeds about 1,500 hours. | |||
| When the “Lamp time” is displayed as 1500 hours, | |||
|
|
|
|
|
| the icon |
| appear. It will disappear when you | |
|
| |||
| do some operation. | |||
• | Attach the lamp cover firmly after replacing the | |||
| lamp. If it is not set correctly, the power will not | |||
| turn on. |
|
| |
• | Use a new lamp when replacing it. | |||
• | The lamp is made of glass and is very fragile. Do | |||
| not touch the lamp with your bare hands and do | |||
| not jolt or damage it. Do not try to use an | |||
| exhausted lamp. | |||
5 | Load a new lamp. |
| |
| Slide until it hits the bottom and tighten the two fixing screws. |
A small amount of inorganic mercury harmful to |
environment is used for the lamp. Dispose of the |
exhausted lamp according to the rules of your |
area. |
6 
3
Attach the lamp cover.
Slide the cover into place and tighten the two screws.
2 1
7 | Reset the lamp timer. |
| |
| Refer to the lamp instructions for resetting. |
Maintenance
