Toshiba TLP560, TLP260 Operating the presentation mode, Start a presentation on the computer

Operating the presentation mode CONTENTS 41

You can change the slide, for the presentation on the computer, by using the remote control when connecting the projector to the computer with the supplied USB cable.

1			23
	Connect a computer to the projector with the supplied USB cable.
	Also connect the RGB cable and the audio cable if necessary.
		USB connector	Computer for presentation
	CONTROL USB AUDIO IN	VIDEO IN

USB cable (supplied)
To USB connector	To USB port
Be sure to connect in the proper direction.

Notes

•This function is available with O.S (operating system) of Windows 98/98SE, Windows Me, Windows 2000, Windows XP or Mac OS9 with a USB port as standard.

•When connecting to the computer’s USB port for the first time, a message asking you to insert the Windows98 or Windows 98SE CD-ROM may appear on the computer’s monitor screen, depending on whether or not the device driver is installed. If so, do as the message says.

•When using a USB cable other than the supplied one, be sure to use a shielded type.

2	Start a presentation on the computer.
	• In case of Microsoft ® PowerPoint ®, start the slide show to make a state of displaying the first slide.
	• In case of Adobe® Acrobat ® or AcrobatReader®, make state that [Full Screen] is selected from [View] menu.
	• This function is also available in other application software that can change a slide by pressing ,	of a
	computer.

Continued

Operations