Connecting a computer | CONTENTS |
You can project the picture from the computer.
Check that the power supplies for the projector and for the computer are off before connecting the cables.
COMPUTER IN connector
For use as both analog RGB and Y/PB/PR input. At shipping from factory, it is set for use as analog RGB input.
|
|
| VIDEO IN | COMPUTER OUT | COMPUTER IN |
CONTROL | USB | AUDIO IN | ( Y/PB/PR ) | ( Y/PB/PR ) |
AUDIO IN jack
For use as audio signal of all input sources.
Computer
23
connectionsInstallation and
To COMPUTER IN connector Be sure to connect in the proper direction.
To monitor port
RGB cable (supplied)
To AUDIO IN jack Audio cable (supplied)
ø3.5mm stereo
Notes
•The projector cannot be connected to a computer without an analog RGB connector. For details, refer to the computer manual.
•You may not be able to connect some computers to the projector. For details, consult the dealer.
•When connecting to a Macintosh computer, some models may need a Mac adapter for connection.
•Some computers may have output modes which are not compatible with this projector. Check the compatibility of the connectors, signal levels, timing, resolutions, etc.
