Toshiba TLP561, TLP260, TLP560, TLP261 owner manual Full Menu settings Default setting

FULL MENU settings - Default setting

CONTENTS 51

You can set the Input source, projection mode, etc. from FULL MENU [Default setting].

To operate FULL MENU, refer to page 44 .
						The relationship between input source and item			Yes: Adjustable	-: Not displayed
						Analog RGB	Y/PB/PR	Video	S-Video	Camera
Input source setting		COMPUTER		SET	: COMPUTER IN connector is selectable with the INPUT button.
: On/Off with ENTER			Analog RGB	SET	: Use COMPUTER IN connector as Analog RGB input.
			Y/PB/PR	SET	: Use COMPUTER IN connector as Y/PB/PR input.
: On/Off with ( ) or (	)						Yes (common for all of the inputs)
		VIDEO		SET	: Video input is selectable with the INPUT button.
		S-VIDEO		SET	: S-Video input is selectable with the INPUT button.
		CAMERA		SET	: Camera input is selectable with the INPUT button.
Projection mode		Standard		SET	The projector is set to the floor-mounted front projection mode.
		Rear		SET	The projector is set to the floor-mounted rear projection mode.		Yes (common for all of the inputs)
		Ceiling		SET	The projector is set to the ceiling-mounted front projection mode.
		Rear ceiling		SET	The projector is set to the ceiling-mounted rear projection mode.
Background		Logo		SET	The TOSHIBA logo is displayed when no signal is input.
		Blue		SET	The entire screen is set to blue when no signal is input.		Yes (common for all of the inputs)
		None		SET	Nothing is displayed when no signal is input.
No signal power off		Off		SET	The power does not turn off automatically even if no signal status continues.		Yes (common for all of the inputs)
		5 min.		SET	The power turns off automatically when no signal status continues for approx. 5 min.
Power on		Manual		SET	The power turns on by pressing the ON/STANDBY button.		Yes (common for all of the inputs)
		Auto.		SET	When the power plug is inserted, the power is on.
Start-up screen		On		SET	The start-up display appears when the power is turned on.		Yes (common for all of the inputs)
		Off		SET	The start-up display does not appear when the power is turned on.
Reset	EXEC.		Return the settings of FULL MENU [Default setting] to the factory default values.				Yes (common for all of the inputs)

Notes

•It is impossible to exit from the menu if no input source is selected.

•If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed.

•In the following conditions, the function to detect no signal (“No signal background”, “No signal power off”) does not activate:

1)When “Video mode” 46 is set to the modes other than [Auto] and Video input or S-Video input is selected.

2)When “Signal format” 46 is set to the modes other than [Auto] and Y/PB/PR input is selected.

•Note that the projector automatically powers up at the restoration of power after a failure, if “Power on” is set to [Auto] with the power plug inserted.

•Even if “Power on” is set to [Auto], the setting of [5 min.] of “No signal power off” is effective.

•Each item can be set at all input sources, but the settings made at one input source are applied in common to all input sources.

•The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is un-plugged or if a power failure occurs while the projector is on, the settings are not memorized.

Settings	Adjustments
	&