Sanyo DWM-2500 instruction manual Random Playback CD, Programmed Playback CD, Clear

Random Playback [CD]

1. Press [PROGRAM/RANDOM] once in the stop mode.

• “Random” appears on the TV screen.

• “RND” blinks on the FL display.

1

2. Press [a] to begin random playback.

•“RND” remains lit on the FL display.

The unit will automatically select tracks at random.

Notes:

• To stop random playback, press [n].2

• The A-B REP and SEARCH MODE modes do not work during Random Playback.

Programmed Playback [CD]

Up to 20 selections can be programmed.	1
Programming procedure	2
1. Press [PROGRAM/RANDOM] twice in the stop mode.
• “Program Mode” screen appears on the TV screen.
• “PGM” blinks on the FL display.
2. Press the number buttons to select the track number.
Example:
To select Track No.3, press [0], then [3].
To select Track No.10, press [1], then [0].
To select Track No.24, press [2], then [4].	3
Notes:

•	If you make a mistake, press [CLEAR].	5
•	To quit the “Program Mode” screen, press [PROGRAM/
	RANDOM].

n(Stop)

CLEAR

3.Press [p] to move the highlighted box down. Example:

Program Mode
All Clear
1	03	6	--	11	--	16	--
2		7	--	12	--	17	--
	--
3	--	8	--	13	--	18	--
4	--	9	--	14	--	19	--
5	--	10	--	15	--	20	--

4.Repeat steps 2 and 3 as above to select another track.

5.Press [a] to start playback.

• “PGM” remains lit on the FL display.

When all programmed selections have played, the unit stops automatically.

•The program contents are retained in memory.

Note:

To play the program again, press [PROGRAM/RANDOM] twice to call up the “Program Mode” screen, then press [a].

To clear the program one by one

1.Press [PROGRAM/RANDOM] twice to display the “Program Mode” screen.

2.Press [4] or [5] to select the track number.

3.Press [CLEAR].

To clear all the programs

1.Press [PROGRAM/RANDOM] twice to display the “Program Mode” screen.

2.Press [4] to select “All Clear”.

3.Press [ENTER].

To change the program

1.Press [PROGRAM/RANDOM] twice to display the “Program Mode” screen.

2.Press [4] or [5] to select the track number.

3.Press the number buttons to select the track number to be replaced.

Note:

To quit the “Program Mode” screen, press [PROGRAM/ RANDOM].

-E23-