Sanyo DWM-2500 instruction manual Initial Settings, Setting Language, Setting Display, Osd

INITIAL SETTINGS

Once the initial settings have been completed, the unit can always be operated under the same conditions.

The settings will be retained in the memory until they are changed, even if the power is turned off.

Notes:

•In this instruction manual, the language in on-screen display is English.

If you change the language, please follow the selected language in on-screen display.

•You cannot switch audio sound track languages if there is only one language recorded on the disc.

•When you play back a DVD video disc, the unit automatically displays the pre-selected subtitle language if it is included on the disc.

•For improvement, on-screen displays subject to change without notice.

Setting Language

1.Press [SETUP] in the stop mode. The setup screen appears. “Language” is highlighted.

2.Press [ENTER]. “Language” screen appears.

3.Press [p] or [o] to select the item (highlighted). Example:

Language	Display		Audio	Parental
OSD		English
Audio		Disc
Subtitle		Disc
DVD Menu		Disc

4.Press [ENTER].

The submenu appears. Example:

Language	Display		Audio	Parental
				English
OSD		English		Español
Audio		Disc		Français
Subtitle		Disc		Deutsch
DVD Menu		Disc		Portugues

5.Press [p] or [o] to select the language (highlighted).

6.Press [ENTER].

The selected language remains.

7.Repeat steps 3 ~ 6 for other items. Note:

If “Others” is selected, enter the language code. (See “Language Code List” on page E35.)

8.Press [o] to skip back to the setup screen (or press [SETUP]).

Setting Display

1.Press [SETUP] in the stop mode. The setup screen appears.

2.Press [a] to select “Display”.

3.Press [ENTER]. “Display” screen appears.

4.Press [ENTER].

The submenu (“4:3 LB”, “4:3 PS” and “16:9”) appears.

5.Press [p] or [o] to select the appropriate setting for your TV screen size.

Example: To select “4:3 PS”

Language	Display		Audio	Parental
				4:3 LB
TV Type		4:3 LB
				4:3 PS
				16:9

6.Press [ENTER].

(In this example, “TV Type 4:3 PS” remains.)

7.Press [o] to skip back to the setup screen (or press [SETUP]).

4:3 LB (Letterbox):

Select when a conventional TV set is connected.

When the wide screen disc is played back, the black bands appear at the top and bottom of screen.

4:3 PS (Panscan):
Select when a conventional TV set is
connected.
When the wide screen disc is played
back, it displays pictures cropped to
fill to your TV screen. The left and	Cut off	Cut off
right edges are cut off.

16:9 :

Select when a wide screen TV set is connected.

Played in “FULL” size. (Setting the wide screen TV to “FULL” mode is also necessary.)

Notes:

•The screen size may differ depending on the DVD video discs.

•If you select 16:9 to get rid of the black bands on screen when wide screen disc is played back, picture may be slightly distorted.

•In some discs, even if 4:3 PS is selected, the black bands may remain on the screen.

-E32-