Pertech manual Power Supply, A470 Command Language Cash Drawer Commands

A470 Users Guide

Cash Drawer

Each cash drawer driver will source 24 volts for 75 ms to the “solenoid +” pin of the appropri- ate RJ-11 jack when the proper cash drawer command is executed. The cash drawer com- mand must be preceded by a line terminator. The command for the cash drawer may vary for the Compatibility Mode selected.

	Pin #		Cash	Cash
			Drawer A	Drawer B
1			N /C	Solenoid +
2			Solenoid +	N /C
3			Solenoid -	Solenoid -
		4	Switch	Switch
		5	Switch	Switch
		6	N /C	N / C

A470 Command Language Cash Drawer Commands

Synopsis	ASCII	Hex		Decimal
Cash Drawer “A”	ESC BEL	1B	07	27 7
Cash Drawer “B”	ESC BS	1B	08	27 8

Warning: This Printer is designed for use only with Pertech Resources A470 / DH Tech- nology 4700 compatible cash drawers. Damage can result if the A470 is connected to a cash drawer that is incompatible. The cash drawer solenoid resistance must be at least 25 ohms or damage to the printer could result.

Power Supply

The A470 printer uses a NTRL Certified external switching power source with a Limited Power Source (LPS) output for use in North America, input 100-240 Vac, 50/60 Hz, 1.5 A, with a maximum power consumption of 60 watts, output is rated at 24 Vdc,2.5A.

The power cable connector is a Mini-Din Barrel Connector and is located at the back or the printer.

Use of this product with a power supply other than the Pertech power supply will require you to test this power supply and Pertech printer for FCC and CE mark Certifications. ( See FCC Radio Frequency Interference Statement on page iii of this manual).

Pertech® 2006 17