Pertech 5300 manual Configuration Report & Setup Mode, =================================

Page 27

Configuration Report & Setup Mode

After the printer is set up, you can run two print diagnostic reports / tests and enter the configuration menu. Below is an example of the configuration report.

1Press and hold the Paper Feed Button and then press the Power Switch to turn the printer on and start the first test.

Validation printers will perform a Self Test if a form is detected, when the power is turned on.

Release the Paper Feed Button after 4 seconds for the printing to begin.

The 5300 completes a test of RAM , a checksum test of program memory, homing and maintenance of the print head, and then prints the configuration settings.

2To change the configuration settings, press the Paper Feed Button when prompted, the Left LED will begin flashing.

����������

��� ���

���������

Note: Validation-Only printers do not have this feature.

Note: If Ink Status Reset is set to “Manual”, first option to print will be “Press feed to Reset Ink Tally”.

=================================

Press paper feed to change configuration

SET-UP INSTRUCTIONS

PRESSING THE PAPER FEED BUTTON WHILE THE

GREEN LIGHT IS FLASHING WILL REJECT THE

LAST PRINTED PARAMETER. IF THE BUTTON IS

NOT PRESSED WITHIN 5 SECONDS. THE PARAM-

ETER WILL BE ACCEPTED AND THE NEXT SET-UP

OPTION WILL BE LISTED.

PRESS THE PAPER FEED BUTTON NOW TO

REJECT THE CURRENT CONFIGURATION AND

CONTINUE WITH THE PRINTER SET-UP.

A. Entering the configuration mode, the printer prints the Set-Up Instructions and prompts the user to press the feed button to reject the current settings.

B. If you don’t want to change an option, wait for five seconds and the next option will print.

C. After completing the Configuration Mode, the printer prints the new configuration settings and stores them in non-volatile memory.

Note: Exiting setup early by turning the printer off will erase any changes made to the configuration. You must complete the setup for changes to take effect.

Serial Number:

 

 

********

Main Firmware

 

 

 

 

 

Revision:

 

 

* ** ***

CRC:

 

 

 

 

****

Boot Firmware

 

 

 

 

 

Revision:

 

 

* ** ***

CRC:

 

 

 

 

****

 

 

 

Printer Control Language

 

 

PCL:

 

 

ACL Language

Diag Mode:

 

Standard Print

Auto LF:

 

 

CR = CR

Soft Fault Recover:

 

Automatic

Font:

 

 

 

Font:

 

 

Standard

Font Quality:

 

Draft

Intl Char set:

 

USA

Code Page:

 

437 USA

Receipt LPI:

 

6 Lines Per Inch

Validation LPI:

 

6 Lines Per Inch

RS232 Serial (when used)

 

 

Baud Rate:

 

57.6K

Data Bits:

 

 

8-bits

Stop Bits:

 

 

1-bit

Parity:

 

 

None

Flow Control:

 

Hardware

USB (when used)

 

 

 

Descriptor:

 

Model Number

Hardware

 

 

 

Validation Clamp:

 

Closed

Form Insert Wait:

 

1 Min

Paper Low Sensor

 

Enabled

Ink Status Reset:

 

Automatic

Document Stop:

 

1.75 Inches

Column Alignment

 

 

 

Half Speed:

3

 

Full Speed:

10

Memory

 

 

 

Installed RAM:

 

128K

Installed ROM:

 

512K

Total User Flash:

 

64K

 

Flash Logos

32K

 

Flash Fonts

0K

 

Flash Macros:

0K

 

Flash Raw Data:

32K

Total User Ram:

 

24560

 

Ram Logos:

24560

 

Ram Fonts:

0K

 

Ram Macros:

0K

Tallies

 

 

 

Printed Lines:

 

0

Dot Count:

 

0

Validation Opens:

 

0

Feed Distance:

 

0

Hours On:

 

0

Flash Updates:

 

0

Cover Opens:

 

0

Diagnostic:

 

 

 

0

0

0

 

====================================

Press paper feed to change configuration

Press paper feed to enter print test

3Otherwise, wait 10 seconds and you can choose to enter an Extended Print Test. After this test, or Ignoring this option, will return the printer to normal operation after 10 seconds.

4.Extended Print Test:Checks the printers vertical line alignment, character fonts, and pitches.

Pertech Resources Inc.

November 2005

220321A

21

Image 27
Contents Series Printer Users Guide Disclaimer Important Information to the User Contents Configuration & Diagnostic Print Tests Trouble Shooting Printer ProblemsSpecifications Index Warranty Title Part Number Where to Get Additional informationPreface Available ModelsChoosing a Location Features and OptionsAbout The Printer Unpacking the PrinterCables Call Ordering Paper and SuppliesPaper Call Cartridge’s CallCorrect Incorrect Using the ControlsOperating the Printer Paper LoadingRibbon Advance Knob Cartridge Installation & Replacement535X Ink Jet Specific Directions 537X Impact Specific DirectionsValidation Print Fields Validation and Document GuidesTab MLV Gear Document Guide InstallationRS232 Serial Interface Connecting the CablesCables and Connections ComunicationsPin # Signal Name Signal Source Description 123456 USB 2.0 InterfaceCash Drawer Rated Output Power Power SupplyInk Jet 535X Power Supply Impact 537X Power SupplyDriver Installation Drivers & UtilitiesXP/2000 Windows Driver Pertech Resources Inc November 220321A COMx Port Set up Print Driver SetupPrinter Configuration Printing Preferences Printer CommandsUse of The Driver from within Applications Logo Download Utility Configuration Utility Program Configuration & Diagnostic Print TestsPrinter Configuration Options Printer Control LanguageModify Host Communication Char/Inch Char/Line Font USB InterfaceRS232 Interface Inkjet Font Pitch ColumnsTallies Memory================================= Configuration Report & Setup Mode6LPI Configuration ExampleOptions for ACL Compatibility Mode Printer Configuration OptionsOptions for A470 Compatibility Mode Compatibility Modes ZC2979, ZC5979 ZC1939 & ZC2059Status Left LED Right LED LED Mode IndicatorsTrouble Shooting Printer Problems LED Error Fault Mode DiagnosticsError Code Diagnosed failure Trouble Shooting General Issues Utility does not communicate with USB connected printerPrinter prints too light to read easily Maintaining The Printer Service & SupportPrint Speed SpecificationsPertech Resources Inc November 220321A Index Printer Control Language 16, 17, 18, 22 Pertech Resources Inc College View Drive Riverton, WY Warranty

5300 specifications

The Pertech 5300 is a remarkable piece of technology that has garnered attention for its innovative features and robust performance in various industries. Designed to enhance workflow efficiency and productivity, this device is a testament to modern engineering and user-centric design.

One of the main features of the Pertech 5300 is its high-resolution display, which provides crystal-clear visuals that enhance user experience. The display is not only vibrant but also energy-efficient, ensuring that users can operate the machine for extended periods without straining their eyes. The touchscreen interface adds an extra layer of convenience, allowing users to navigate through applications effortlessly and intuitively.

In terms of processing power, the Pertech 5300 is equipped with a state-of-the-art processor that ensures quick and seamless performance. This ensures that even the most demanding applications run smoothly, making it suitable for real-time data processing and high-volume tasks. Coupled with ample RAM and storage options, users can expect minimal lag and ample space for data storage.

The device incorporates advanced connectivity options, including Bluetooth, Wi-Fi, and USB ports, making it easy to connect with other devices and networks. This versatility enables users to quickly share data, integrate with existing systems, and stay connected, enhancing overall operational efficiency.

Another standout feature of the Pertech 5300 is its durability. Built with high-quality materials, the device is designed to withstand harsh working conditions. Dust and water resistance capabilities make it ideal for industrial environments, ensuring that it remains operational even in challenging situations.

In addition to its physical robustness, the Pertech 5300 boasts software solutions that cater to diverse industry needs. This system integrates seamlessly with various applications, allowing for customized solutions that can adapt to specific operational demands.

Security is another priority with the Pertech 5300. Equipped with advanced encryption and authentication protocols, it ensures that sensitive data remains protected from unauthorized access. This focus on security is crucial for businesses that handle confidential information.

In summary, the Pertech 5300 stands out with its high-resolution display, powerful processing capabilities, extensive connectivity options, durability, adaptable software solutions, and strong security features. Whether used in manufacturing, logistics, or other sectors, the Pertech 5300 is designed to elevate productivity and streamline processes, making it an invaluable asset for any organization.