Pride Mobility Dynamic DX manual SCR Components and Connections

SCR Basic Operation Manual 5

Figure 1 provides information on the SCR components and connections. Use this diagram to familiarize yourself with the function and location of each component before using the SCR.

Reverse Indicator

Disregard - this is a non- functioning feature.

Battery Meter

Battery charge level is indicated by a set of six LEDs.

On/Off Switch

Toggles the entire DX control system between the On & Off modes.

LCD Display

4-line, 20 character backlit LCD which shows all functions and instructions.

Mode Switch

Cycles through the programmed modes.

HHP/Wizard Port

Allows connection to an IBM computer for custom programming and where standard drive programming occurs with the HHP.

DXBUS Socket

For connecting the DX Remote with a DXBUS cable to other DX compatible modules

External Switch Jacks

Three 3.5 mm (1/8") jack sockets to allow connection of external switches

Battery Charger Port

Standard 3-pin XLR type battery charger socket used with off-board charging systems.

Figure 1. SCR Components and Connections