POSIFLEX Business Machines LS-1000 Scanner Setup Programming, Scan Test, Reset to Default Status

Page 5

SCANNER SETUP (PROGRAMMING)

In most of the cases no setup is required. The default setup of the scanner makes the scanner able to detect automatically the most commonly applied bar code types as tabulated above and send the data to the host system as if they are read from an USB or RS232 keyboard. To read the disabled bar code types, the programming barcodes enclosed in the later sections of this booklet are required to enable the required bar code type.

There are other advanced features like beep tone, sleep mode timings, same-code delay time, setting headers and trailers for data output and setting some particular parameters within each code type, or even the communication interface types (However, must select only the type of the interface cable physically applied.) can be achieved by downloading the advanced programming bar codes from our web site and scanning the printed programming codes.

Individual parameters may be set at any time without affecting the other parameters.

Scan Test

With the scanner running (LED blue) and the host system on with an active window of a text editor, try to scan several known-good barcodes.

Check the results on the system screen. If the scanner is reading okay, no further setup may be necessary.

If the POS screen does not show the expected scans, go to Set Up, below.

Reset to Default Status

Since the scanner firmware covers several interface types, when you want to reset the scanner to default status, please scan <Enter/Exit programming mode>, <.RESET>, <Return to USB default> (or <Return to RS232 default> if it is RS232 model), <Return to customer default> (if a customer preference has been saved previously) and <Enter/Exit programming mode> consecutively.

Set Up

When the scanner is powered on (LED blue), present the <Enter/Exit programming mode> barcode, found in the Programming Codes section, to the scanner. The scanner gives two beeps: low and high, and the LED turns red. The scanner enters programming mode.

Decide which parameters are required and find their barcodes in the programming codes section.

Page 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents LS-1000 Series Laser Barcode Scanner User’s Manual Fundamental Information Scanner Introduction FeaturesParts Identification Description FunctionSupported Bar Code Types Supported Bar Code Symbol Type Default StatusOperation Status Reset to Default Status Scanner Setup ProgrammingSet Up Scan TestPage Omni-Directional Scan Mode Single Line Scan ModeScanner Operation Operating the ScannerChange Beeper Volumn Using Function Button Sleep ModeLED Indications LED status IndicationScanner Maintantence Trouble Shooting GuideProblem Diagnostic Tips Programming Codes Reset Page Page Page Page UPC/EAN ADD on OFF Page Page Page Page MSI enable MSI Disable Enter/Exit Programming Mode

LS-1000 specifications

The POSIFLEX Business Machines LS-1000 is a robust point of sale terminal designed for a variety of business environments, including retail and hospitality. Renowned for its reliability and user-friendly interface, the LS-1000 stands out as a key player in modern transaction solutions.

One of the key features of the LS-1000 is its powerful processing capability. It is equipped with an efficient processor that enables swift transaction handling, ensuring that customer wait times are minimized. This efficiency is vital for businesses that face high volumes of customer interactions, allowing staff to focus more on customer service rather than slow technology.

The LS-1000 incorporates a high-resolution touchscreen display that is responsive and easy to navigate. This feature enhances the user experience, allowing employees to interact with the system quickly and effectively. The touchscreen interface is designed with intuitive software that can be customized to meet specific operational needs, making it versatile for different business types.

Durability is another important characteristic of the LS-1000. Built to withstand the rigors of daily use in bustling environments, the terminal features a robust casing that can endure accidental spills, drops, and other common hazards present in commercial settings. This reliability ensures longevity, reducing the need for frequent replacements.

In terms of connectivity, the LS-1000 supports various communication protocols, enabling it to integrate with existing business systems seamlessly. Whether it's linking to inventory management software or connecting with payment processors, this terminal provides the flexibility businesses require to maintain efficiency and connectivity.

Additionally, the LS-1000 supports a range of peripheral devices, including barcode scanners, receipt printers, and cash drawers. This compatibility allows businesses to create a comprehensive point of sale ecosystem tailored to their unique operational demands.

Security features are paramount in the LS-1000 design. It employs advanced encryption and security protocols to protect sensitive customer and business data, thus fostering trust and reliability in transactions.

The energy-efficient design of the LS-1000 is also noteworthy. It consumes minimal power while delivering high performance, which not only lowers operational costs but is also beneficial for environmentally conscious businesses.

In summary, the POSIFLEX Business Machines LS-1000 is a top-choice POS terminal that offers a blend of speed, durability, and adaptability. With its impressive array of features, modern technology, and robust performance, it is well-suited for various retail and hospitality applications, ensuring that businesses can operate smoothly and efficiently.
Top Page Image Contents