POSIFLEX Business Machines Installing Driver, Paper Cutting, Web Manager for Aura-6800L

Page 9

Paper Cutting

Generally, after paper printed and automatically cut every time, printer will retract the paper roll in order to reduce the paper loss. When the auto-cut function enable, the printer will leave the advance paper in 4.8 mm long. Incase the user applies cut without paper feed through DIP switch and setting change to have something such as a logo printed on top of each slip, the advance paper will be in 4.8 mm. It is also highly suggested to print the logo and necessary paper feeding to make 4.8 mm paper advance right after each cut to prevent curling up and jamming of paper front edge inside the paper exit slot.

INSTALLING DRIVER

There will be a Posiflex Product Information CD or DVD or a separate CD of similar nature, which is specifically create for the Aura-6800U and Aura- 6800L. Please find the appropriate subfolder from the non-specific Posiflex Product Information CD or DVD and please find the information document such as “read me” or installation guide or application guide and follow the instructions inside.

LAN and Wi-Fi PRINTER SPECIFIC ISSUES

Web Manager for Aura-6800L

The default static IP for the Aura-6800L is 192.168.192.168 and default listen port is 9100. User may set his own IP to the same network segment and use any browser to connect to the printer IP to configure the LAN setup of the Aura-6800L including changing the printer IP for application according to his network administrator’s request. However, DHCP is not support.

Reset Pin Hole

As the setup for the Aura-6800L/W can be set freely, the changes are not well registered some troubles could be introduced. Therefore, in Aura-6800L/W, there is a “Reset pin hole” near the LAN connector or Wi-Fi Module. Use something like a ball pen tip or straightened end of paper clip to push and hold for at least 5 seconds into this hole will reset the LAN / Wi-Fi setup of the printer back to the default values at delivery so the user may re-do all setup. The LAN setup can be viewed in second paragraph of self-test printout for the Aura-6800L.

Page 9

Image 9
Contents $XUD Getting Start Product BriefingUnpacking Options Product PicturesTop View Front View Bottom ViewRear View When to Replace Paper IndicatorsQuick START-UP Loading PaperSerial Connection Connecting CablesParallel Connection LAN ConnectionPower Connection Wi-Fi ConnectionPower On Peripheral ConnectionSpecial Adjustments Paper Near End Sensor58mm Paper Spacing Plate Reset Pin Hole Installing DriverPaper Cutting Web Manager for Aura-6800LPosiflex Wi-Fi POS Printer Manager for Aura-6800W Maintenance Guide LinesOperation Guide LAN POS Printer ManagerPrint Head Cleaning General CleaningTrouble Shooting General ProblemsPaper Jam Problems Advanced Analysis Tool Useful TipsPrinter SpecificationsPrinter Setup Power AdaptorFurther Technical Information PaperSwitch DIP SwitchBaud rate setup PositionSoftware switch SW2 software switch works as following Switch 1 Position Default setup forAura-6800L Aura -6800/P/UPrint Density SW2 PosSwitch 2 Position Default setup for all Aura Multiple Interface IssueUpos Concerns Interface models$%&*+,-!Page#20