POSIFLEX Business Machines POS terminals, HT-2212 Customer Display Option or 2ND Display

Push inward to turn left-right

Push down to turn up-down

LCD CASHIER DISPLAY Push down the round plastic

button at rear of the display base as circled in right picture to adjust the

display up and down. Release the

button when done will lock the panel firmly for application. Pushing the

rectangular shape plastic button to its

right toward the base center allows user to adjust the display horizontally for best view angle.

CUSTOMER DISPLAY (OPTION) OR 2ND DISPLAY

When the HT series is ordered with the customer display PD-2601 or PD-7321 option, the customer display together with the pole for installing them to corner of back cable cover will be delivered in separate package from the system unit. Please follow the

Installation Guide in package of the option. The customer display will occupy one USB or COM port in the connection

area. Same concept applies to the LM-2010 2nd display monitor. However, the port for LM-2010 is the VGA connector.

SIDE MOUNT UPGRADE KIT (SD-300/BC-300/KP-200 OPTION)

When a side-mount upgrade kit option SD-300 or BC-300 is ordered with the HT system, this option is already installed in the delivery. If they were to be later installed or if the side mount upgrade kit is KP -200, they have to be mounted to the right edge of LCD display at the 2 screws pointed in the left picture. Their USB cable (If KP-200 is

without the smart card reader, there could be no USB cable.)

should be inserted in the cable hook on back of LCD panel as circled in the left picture. The PS/2 KB cable of KP-200 should be routed to the KB port in the connection area.

The USB cable of the side mount upgrade kit should be connected to the extended USB port at top right edge of the system

unit as circled in the picture at right. After removing the

plastic cover by pushing it side way, the extended USB port can

be found as marked in the lower picture at left.

Part 8