POSIFLEX Business Machines TM-8115, LM-8115, TM-8315 II. Carton Contents, III. Installation Guide

II.CARTON CONTENTS

1.Touch Monitor (Main unit + Adjustable base stand assembly)

2.User’s Manual

3.VGA cable

4.USB cable

5.Power adaptor & power cord(For TM/LM-8115)

(For TM-8315, please refer to the terminals manual to support power from VGA cable)

6.Posiflex Product Information CDROM

7.Option RS232 cable

III. INSTALLATION GUIDE

TM/LM-8115

Since the monitor and stand are packaged separately, please take out and hold the PE foams carefully and DO NOT detach and drop it as show in the following picture.

After take the PE foam out from the carton, please remove the PE foam with extra care and make sure place the monitor and stand on a soft clean flat surface such as table and as show in the picture at the right side.

Please find the four holes in the top of stand. Take the stand and align these four matching holes to the four matching pegs which are in the back on monitor.

After matching the stand and monitor, push the stand to the arrowed direction as show in the right picture. At this time, turn the monitor to the normal position and plug the power then it can start to use.

Part 2