POSIFLEX Business Machines TM-8115, LM-8115 Input / Output Ports, VI. Available Option Items

V. INPUT / OUTPUT PORTS

12 V DC	USB (B)	USB (A)	VGA	COM
input	(to Host)	(to Devices)	input	(option RS232)

VI. AVAILABLE OPTION ITEMS

1.Side mount upgrade kit SD-400Z or KP-300

2.Wall mount kit (WB-6000V-B)

VII.HARDWARE INSTALLATION

A.Option Side Mount Upgrade Kit

When a side-mount upgrade kit option such as SD-400Z is ordered with the LM-8115 / TM-8115 / TM-8315 monitor, this option is already installed in the delivery. No matter the kit

itself contains MSR only, finger print sensor only or both options, the connection to the LM-8115 / TM-8115 / TM-8315 monitor is through an internal cable in right side cover of the LCD/touch unit. Remove the 2 circled screws in the right

picture to remove the cover for side mount upgrade kit as viewed from back of the panel.

Take out the cable inside this cover as arrowed in the right picture here and connect it to connector inside the side mount upgrade kit as circled in the same picture. Gently arrange the excessive length of this cable back in the hole and screw-fit it back to the position originally occupied by the cover. Please reserve the cover if there is chance to have the side mount kit removed in the future.

B.Cable Connections For TM/LM-8115

In order to settle the touch monitor properly in a point of sale system, all the cable connections have to be routed through its base. Therefore, please observe the procedures from A to C below to separate the main unit from the base stand assembly after all cables in connection area disconnected.

Part 5