Step A: Prepare a soft clean flat surface, such | A | |
as a piece of cloth on the desk to seat | ||
B | ||
the front surface of main unit. | ||
|
C
Step B: Press the Lock/Release button for
main unit detach and meantime ...
Step C: Slide the base stand assembly to separate the main unit from base stand
Refer to the bottom view picture of the separated | Cable Passage | |
base, pass all cable through the cable tunnel as | ||
| ||
hollow arrowed with cable tie from the cable |
| |
passage to the main unit in left picture. |
|
Hook the main unit back onto base stand assembly by matching the matching pegs to round part of matching holes and slide them down to slot part till the rear lock/release button clicks.
Matching Pegs
Matching Holes 
Round Part
Slot Part 
Connect the VGA cable, USB cable (type B connector) and power cable to the I/O connection area of