Lynx EPM-4 manual Technical Specifications, Compatibility

Page 10

Technical Specifications

Technical Specifications

Specifications are typical at 25°C with 5.0V supply unless otherwise noted.

Board Size:

3.55" x 3.775" (PC/104 standard).

Storage Temperature:

–40°C to 85° C

Operating Temperature:

EPM-4c, g 0° C to +60° C (100 FPM airflow)

EPM-4e, h -40° C to +85° C (free air, extended temperature versions) Power Requirements: (with keyboard, mouse, and hard drive running DOS)

EPM-4c, g 133 MHz +5V ±5% @ 0.94A

EPM-4e, h 100 MHz +5V ±5% @ 0.84A, extended temperature versions +3.3V or ±12V may be required by some expansion modules

System Reset:

Vcc sensing, resets below 4.70V typ.

Watchdog timeout

BBSRAM Interface:

2 MB option mapped into high memory

IDE Interface:

Industry standard 2mm 44-pin non-latching style, CompactFlash socket.

LPT/Floppy Interface:

Supports one floppy drive or parallel port.

Ethernet Interface:

Autodetect 10BaseT/100BaseTX based on Intel 82551ER. 12K transmit/receive buffer.

COM1 and COM2 Interface:

RS-232, 16C550 compatible, 115K baud max.

COM3 and COM4 Interface:

RS-422/485, 16C550 compatible, 460K baud max.

Connectors:

Utility:

2mm 50-pin shrouded

IDE:

2mm 44-pin

Floppy/LPT:

2mm 20-pin shrouded

Ethernet:

RJ45

Power:

0.1” 10-pin

CompactFlash

Type II socket

BIOS: General Software embedded BIOS with OEM enhancements

Field upgradeable with Flash BIOS Upgrade Utility

Bus Speed:

PCI, PC/104-Plus:

33

MHz, Revision 2.0

PC/104:

8

MHz, Revision 2.5

Compatibility:

PC/104 – Fully functional with most PC/104 devices. See the Expansion Bus section for details. Embedded-PCI (PC/104-Plus) – Full compliance, 3.3V or 5V modules

RoHS: EPM-4g, h – Full compliance

Weight:

EPM-4c, g – 0.117 kg (0.275 lbs)

EPM-4e, h – 0.116 kg (0.255 lbs)

Specifications are subject to change without notice.

Introduction – 2

EPM-4 Reference Manual

Image 10
Contents Reference Manual EPM-4 Product Release Notes SupportModel EPM-4 Reference ManualPage Table of Contents Appendix a CBL/CBR-5009 Appendix B References Introduction DescriptionTechnical Specifications CompatibilityEPM-4 Block Diagram RoHS-Compliant Version Technical Support EPM-4 Support WebsitePage Configuration / Operation OverviewInitial Configuration and Setup Cmos Setup / Boot Procedure Basic Cmos ConfigurationConsole Redirection IDE Drive Geometry Cmos Setup / IDE ConfigurationBoot Order Drive Assignment OrderDefault 0E0h Cmos Setup / Advanced ConfigurationBios Ext Default DisabledDefault SPP Default EnabledDefault IRQ7 Default 133 MHzDefault IRQ3 Default IRQ4Default IRQ11 Using Custom Cmos Defaults Save Cmos as custom defaultsPage Physical Dimensions ReferenceReference EPM-4 Reference Manual Hardware Assembly External Connectors B10Connector Functions and Interface Cables Mating Transition Cable ‡Pin 1 Location Connector FunctionJumper Block Locations Jumper Block LocationsSystem Bios Selector Jumper SummaryMain Power Connector Pinout Signal Name Description Power SupplyCBL/CBR-1008 EPM-4 Revision Battery Type Reorder Part NoSystem RAM Real Time ClockBattery Backed Static RAM Serial PortsPin Name Signal Name Function IDE Hard Drive Connector Pinout SignalIDE Hard Drive / CompactFlash / CD-ROM Interface Utility Connector Pinout CBR-5009 Signal Utility Connector J7CBR-5009 Pin Connector Signal KEYBOARD/MOUSE Interface Centronics Floppy Signal Pin Direction Parallel / Floppy PortGreen LED Link / Activity RJ45 Ethernet ConnectorEthernet Interface Yellow LED SpeedWatchdog Timer Expansion Bus PC/104-PlusModulesPC/104 Modules Memory Map Memory and I/O MapStart End Address Comment MAP On-Board I/O DevicesInterrupt Configuration Components GroupSpecial Control Register SCR READ/WRITE 00E0hRevind Read only 00E1h Revision Indicator RegisterBit Mnemonic Description Map and Paging Control Register Mpcr READ/WRITE 00E3HPage CBL/CBR-5009 Connectors Appendix a CBL/CBR-5009 aCBL/CBR-5009 Dimensions and Mounting CBL/CBR-5009 SchematicAppendix B References

EPM-4 specifications

The Lynx EPM-4 is a cutting-edge electronic monitoring device designed for a wide range of applications including transportation, logistics, and outdoor activities. With its sleek design and robust capabilities, the EPM-4 provides users with advanced tracking and monitoring features that enhance efficiency and safety.

One of the standout features of the Lynx EPM-4 is its high-precision GPS tracking technology. This allows for real-time location monitoring, ensuring that users can keep tabs on their assets or personnel at all times. The GPS functionality is complemented by cellular connectivity, enabling seamless communication and data transmission even in remote areas. Whether used in urban settings or off-the-grid locations, the EPM-4 maintains reliability and performance.

Another key characteristic of the Lynx EPM-4 is its user-friendly interface. The device is equipped with a bright LED display that provides instant access to essential information, including speed, distance traveled, and battery status. Its intuitive navigation system ensures that even users with minimal technical expertise can operate the device effectively.

Durability is a fundamental aspect of the Lynx EPM-4 design. Constructed to withstand harsh environmental conditions, it features IP67-rated water and dust resistance. This ensures that the device can perform flawlessly in diverse weather conditions, making it suitable for outdoor enthusiasts and professionals alike.

The EPM-4 also incorporates advanced battery technology, allowing for extended usage time on a single charge. This is particularly advantageous for long-haul trips or field operations where charging facilities may be unavailable. Additionally, the device supports various power management modes that optimize battery life based on usage patterns.

Connectivity options are another highlight of the Lynx EPM-4. It supports Bluetooth and Wi-Fi, enabling quick data transfer to smartphones, tablets, or computers for further analysis. Users can easily share information with team members or stakeholders, enhancing collaboration and decision-making processes.

Lastly, the Lynx EPM-4 features customizable settings, allowing users to tailor the device’s functionality to meet their specific needs. Whether it’s setting geofences, receiving alerts for unusual activity, or customizing data logging intervals, the EPM-4 ensures a personalized experience that maximizes utility.

In conclusion, the Lynx EPM-4 stands out as a premier electronic monitoring solution, combining GPS precision, robust durability, extended battery life, and versatile connectivity. With its advanced features and user-friendly design, it serves a vital role in managing logistics, ensuring safety, and enhancing operational efficiency across various industries.