Lynx EPM-4 manual Ethernet Interface, Green LED Link / Activity, Yellow LED Speed

Page 40

Ethernet Interface

Ethernet Interface

The EPM-4 features an industry-standard 10baseT / 100baseTX Ethernet interface based on the Intel 82551ER Ethernet controller. This PCI based interface chip is widely supported. Drivers are readily available to support a variety of operating systems such as QNX, VxWorks and other RTOS vendors.

BIOS CONFIGURATION

The Ethernet interface shares PC/104-Plusinterrupt “INTC”. The CMOS Setup screen is used to select the IRQ line routed to INTC*.

STATUS LED

Two colored LEDs (D1) located next to the RJ-45 connector provide an indication of the Ethernet status as follows:

Green LED (Link / Activity)

 

ON

Active Ethernet cable plugged into J4.

 

 

No Tx/Rx data activity.

OFF

Cable not plugged into J4

 

 

Cable not plugged into active hub

BLINKING

Active Ethernet cable plugged into J4.

 

 

Tx or Rx data activity detected on the cable

Yellow LED (Speed)

 

ON

100baseTx (Fast) detected on Ethernet cable.

OFF

10BaseTx (Slow) detected on Ethernet cable.

ETHERNET CONNECTOR

Aboard-mounted RJ-45 connector is provided to make connection with category 5 Ethernet cable. The Ethernet controller will autodetect 10BaseT/100BaseTX connections.

Table 7: RJ45 Ethernet Connector

J4

Signal

 

Pin

Name

Function

4

IGND

Isolated Ground

5

IGND

Isolated Ground

6

R–

Receive Data –

3

R+

Receive Data +

7

IGND

Isolated Ground

8

IGND

Isolated Ground

2

T–

Transmit Data –

1

T+

Transmit Data +

This device is protected against ESD damage by IEC 61000-4-2 rated transient voltage suppressor components.

Reference – 32

EPM-4 Reference Manual

Image 40
Contents Reference Manual EPM-4 Product Release Notes SupportModel EPM-4 Reference ManualPage Table of Contents Appendix a CBL/CBR-5009 Appendix B References Introduction DescriptionTechnical Specifications CompatibilityEPM-4 Block Diagram RoHS-Compliant Version Technical Support EPM-4 Support WebsitePage Configuration / Operation OverviewInitial Configuration and Setup Cmos Setup / Boot Procedure Basic Cmos ConfigurationConsole Redirection Cmos Setup / IDE Configuration Boot OrderIDE Drive Geometry Drive Assignment OrderCmos Setup / Advanced Configuration Bios ExtDefault 0E0h Default DisabledDefault Enabled Default IRQ7Default SPP Default 133 MHzDefault IRQ3 Default IRQ4Default IRQ11 Using Custom Cmos Defaults Save Cmos as custom defaultsPage Physical Dimensions ReferenceReference EPM-4 Reference Manual Hardware Assembly External Connectors B10Connector Functions and Interface Cables Mating Transition Cable ‡Pin 1 Location Connector FunctionJumper Block Locations Jumper Block LocationsSystem Bios Selector Jumper SummaryMain Power Connector Pinout Signal Name Description Power SupplyCBL/CBR-1008 EPM-4 Revision Battery Type Reorder Part NoSystem RAM Real Time ClockBattery Backed Static RAM Serial PortsPin Name Signal Name Function IDE Hard Drive Connector Pinout SignalIDE Hard Drive / CompactFlash / CD-ROM Interface Utility Connector Pinout CBR-5009 Signal Utility Connector J7CBR-5009 Pin Connector Signal KEYBOARD/MOUSE Interface Centronics Floppy Signal Pin Direction Parallel / Floppy PortRJ45 Ethernet Connector Ethernet InterfaceGreen LED Link / Activity Yellow LED SpeedWatchdog Timer Expansion Bus PC/104-PlusModulesPC/104 Modules Memory Map Memory and I/O MapStart End Address Comment MAP On-Board I/O DevicesInterrupt Configuration Components GroupSpecial Control Register SCR READ/WRITE 00E0hRevind Read only 00E1h Revision Indicator RegisterBit Mnemonic Description Map and Paging Control Register Mpcr READ/WRITE 00E3HPage CBL/CBR-5009 Connectors Appendix a CBL/CBR-5009 aCBL/CBR-5009 Dimensions and Mounting CBL/CBR-5009 SchematicAppendix B References

EPM-4 specifications

The Lynx EPM-4 is a cutting-edge electronic monitoring device designed for a wide range of applications including transportation, logistics, and outdoor activities. With its sleek design and robust capabilities, the EPM-4 provides users with advanced tracking and monitoring features that enhance efficiency and safety.

One of the standout features of the Lynx EPM-4 is its high-precision GPS tracking technology. This allows for real-time location monitoring, ensuring that users can keep tabs on their assets or personnel at all times. The GPS functionality is complemented by cellular connectivity, enabling seamless communication and data transmission even in remote areas. Whether used in urban settings or off-the-grid locations, the EPM-4 maintains reliability and performance.

Another key characteristic of the Lynx EPM-4 is its user-friendly interface. The device is equipped with a bright LED display that provides instant access to essential information, including speed, distance traveled, and battery status. Its intuitive navigation system ensures that even users with minimal technical expertise can operate the device effectively.

Durability is a fundamental aspect of the Lynx EPM-4 design. Constructed to withstand harsh environmental conditions, it features IP67-rated water and dust resistance. This ensures that the device can perform flawlessly in diverse weather conditions, making it suitable for outdoor enthusiasts and professionals alike.

The EPM-4 also incorporates advanced battery technology, allowing for extended usage time on a single charge. This is particularly advantageous for long-haul trips or field operations where charging facilities may be unavailable. Additionally, the device supports various power management modes that optimize battery life based on usage patterns.

Connectivity options are another highlight of the Lynx EPM-4. It supports Bluetooth and Wi-Fi, enabling quick data transfer to smartphones, tablets, or computers for further analysis. Users can easily share information with team members or stakeholders, enhancing collaboration and decision-making processes.

Lastly, the Lynx EPM-4 features customizable settings, allowing users to tailor the device’s functionality to meet their specific needs. Whether it’s setting geofences, receiving alerts for unusual activity, or customizing data logging intervals, the EPM-4 ensures a personalized experience that maximizes utility.

In conclusion, the Lynx EPM-4 stands out as a premier electronic monitoring solution, combining GPS precision, robust durability, extended battery life, and versatile connectivity. With its advanced features and user-friendly design, it serves a vital role in managing logistics, ensuring safety, and enhancing operational efficiency across various industries.