6
7
8
Click the [Options...] button to open the dialog box. Several functions are not supported by some plotter models (grayed out options are not supported).
Folder Options
Program: Select Folder Bypass or Programs 1 through 20.
Margin: Select Use program setting or Always off.
Output Bin: Select Don’t care, Fanfold output, or Bin 1 through Bin 13.
Manual output: Select Yes or No to use or not to use the function.
Click [Image Correction] button to open the dialog box.
A correction graph indicates how an output picture image is corrected. By correcting the graph, you can increase contrast to the output image or adjust the brightness of the output image.
Saturation:
Brightness:
Gamma:
Preset value: Reset the corrected graph to default
When the “Device Setup dialog box is closed, a port specification prompt is displayed. Specify a port accordingly.
1.1 ADI Installation | 5 |