Magnavox 701P41586 manual HDI Installation, Installing and Setting up the Driver for Local Plotter

1.2 HDI Installation

The following example is to configure a local non-system plotter and network non- system plotter.

Copy the Driver

1 Unzip the driver file. This will create subdirectories for 2000, 2000i, 2002 and 2004.

Installing and Setting up the Driver for Local Plotter

1

2

3

4

5

6

7

Open the AutoDesk Plotter Manager.

In the AutoDesk Plotter Manager, double-click the Add-a-Plotter wizard.

In the Add-a-Plotter wizard, read the Introduction, and then choose Next to advance to the Add Plotter - Begin page.

On the Add Plotter - Begin page, choose My Computer. Choose Next.

Choose Have Disk to locate the HIF file on that driver disk, and install the driver supplied with your plotter.

On the Add Plotter - Plotter Model page, select a manufacturer and model. Choose Next.

•(Optional) The Import PCP or PC2 screen enables you to use configuration information from a PCP or PC2 file created with an earlier version of AutoCAD.

On the Add Plotter - Ports page, select the port to use when plotting. Choose Next. The ports available for the specified device are displayed.

1.2 HDI Installation 7