Paper size: Select paper size. For this driver, paper size must be selected here, not at “Paper Size and Orientation” in the “Print/Plot Configuration” dialog box.
Length: When “Custom size” is selected at “Paper Size”, set its length can be set in integral value in 1mm increments.
Set margin: Set a margin in the range of 0 to 10mm on each side of paper. This margin reduces the maximum plotting area.
Fill: Set a solid or halftone (dither) pattern for filling graphics or TrueType fonts.
Select resolution: Select resolution for raster (picture image) output.
Image correction: Click here to open the
Versions...: Version of this driver
Red print: Not supported by this model.
Label: Enter a message to add as a drawing label. Only alphanumeric characters (ASCII codes) can be used. The maximum number of characters is 64.
Number of Copies: Specify the number of copies (1 to 99).
Select generated data: Select a plotter language (RTL/GL2/VCGL+MMR) to generate the data. “VCGL+MMR” is not supported by some of the plotter models.
Options...: Click the “Options...” button to open the dialog box to set optional functions unique to the selected plotter model.
6 Click the [Options...] button to open the dialog box. Several functions are not supported by some plotter models (grayed out options are not supported).
Folder Options
Program: Select Folder Bypass or Programs 1 through 20.
1.3 Driver Operation Reference | 11 |