Logic Controls user manual Startingthe LK7000D.EXE Program

Page 10

STARTINGTHE LK7000D.EXE PROGRAM

This program can be used with or without the keyboard being attached to the computer. Note that the PC must be booted up in DOS before starting the program. It will not run properly under Windows DOS prompt.

To start the program, type LK7000D at the LK7000 DOS prompt and press ENTER. When the program is up, it will automaticallly display the graphic graphics screen as below.

Image 10

Contents Model LK7000 Programmable Matrix Keyboard FCC Notice Table of Contents Features Carton Contents Hardware Connections Functional Test Page Utility Disk Contents Startingthe LK7000D.EXE Program Programming the LK7000 Keyboard Page Advanced Programming ScanSpecial Features of the LK7000 INTER-STRING DelayMULTI-LEVEL Definition Medium Coffee Small Coffee Large CoffeePage Special Configurations Description of Special Configuration Menu F3 RAM Data Transfer MenuComputers MemoryPage LK7000 Programmable Keyboard Specifications Pitch Angle SymbologiesAddendum Scanner Position To Activate the Scanner