Logic Controls LK7000 user manual Hardware Connections

Page 6

HARDWARE CONNECTIONS

The LK7000 can be connected to an IBM101 PC, XT, AT or clone

computer, PS/2 computer, or computer terminal. The following diagram shows how the keyboard connects to the computer and standard

keyboard or other keyboard peripheral (magnetic stripe reader, scanner, etc.).

To

To

Reserved

Peripheral

Computer

for optional

 

 

MSR

NOTE: Before making any connections it is always advisable to turn off the computer.

A.Connecting the LK7000 to an IBM101 PC, XT, AT, or clone computer’s keyboard port:

1.Use the computer interface cable. Plug the AT or PS/2 Male

connector plug into the compter. Connect the RJ11 connector into the “To Computer” connector on the LK7000.

2.Connect the keyboard interface cable to the standard keyboard. The

PS/2 Female connector plugs into the PS/2 connector on the rear panel of the LK7000. The RJ11 connector plugs into the “To Peripheral” connector on the back of the LK7000.

3

Image 6
Contents Model LK7000 Programmable Matrix Keyboard FCC Notice Table of Contents Features Carton Contents Hardware Connections Functional Test Page Utility Disk Contents Startingthe LK7000D.EXE Program Programming the LK7000 Keyboard Page Advanced Programming ScanSpecial Features of the LK7000 INTER-STRING DelayMULTI-LEVEL Definition Medium Coffee Small Coffee Large CoffeePage Special Configurations Description of Special Configuration Menu F3 RAM Data Transfer MenuComputers MemoryPage LK7000 Programmable Keyboard Specifications Pitch Angle SymbologiesAddendum Scanner Position To Activate the Scanner