Working It Connecting External Speakers
Connecting External Speakers
The following pages illustrate how to connect your Duoverb to Line 6 speaker cabinets. If you are using any other cabinets be sure to check your speaker cabinets’ impedance
and choose the matching setting on your Duoverb’s rear panel impedance switch. In correct settings will give you less volume than you’d expect, or cause Duoverb to shutdown its power amps after a while to protect them from
2• 9
Hooking up your Combo in stereo to a single Duoverb 2x12 Cabinet
| SPEAKER OUTS / CLASS 2 WIRING | OUTPUT | CABINET | |
|
|
| IMPEDANCE | MODELING |
RIGHT | RIGHT | LEFT - MONO - LEFT | 4 OHMS 8 OHMS | OFF OPEN CLOSED |
|
| |||
Connect the speakers from your combo to the right outputs.
RIGHT | LEFT |
| N222 |
STEREO - 8 | MONO - 4 |
USE BOTH JACKS | THIS JACK ONLY |
80 WATTS MAX PER SPEAKER | 160 WATTS TOTAL MONO |
Hooking up your HD in stereo to a single closed back 2x12 cabinet
*If you are using an open back cabinet such as the Duoverb Extension Cabinet select OPEN CABINET MODELING.
| SPEAKER OUTS / CLASS 2 WIRING | OUTPUT | CABINET | |
|
|
| IMPEDANCE | MODELING |
|
|
| 4 OHMS 8 OHMS | OFF OPEN CLOSED |
RIGHT | RIGHT | LEFT - MONO - LEFT |
|
|
*
RIGHT | LEFT |
| N222 |
STEREO - 8 | MONO - 4 |
USE BOTH JACKS | THIS JACK ONLY |
80 WATTS MAX PER SPEAKER | 160 WATTS TOTAL MONO |