NordicTrack manual ADSL2+ Wireless N150 Modem Router Configuration

NetComm Gateway Series - ADSL2+ Wireless N150 Modem Router

ADSL2+ Wireless N150 Modem

Router Configuration

1.Please insert the supplied CD into your CD-ROM drive.

2.The CD should auto-start, displaying the window shown below. If your CD does not start automatically, go to Windows Explorer, Select your CD drive and double click “autorun.exe”.

3.To configure the device, please click “Easy Configuration”.

4. Enter the VPI, VCI, Username and Password your ISP (Internet Service Provider) provided, and Protocol mode. Then press “Next”.

5.Please enter the “ESSID” and Wireless “Default Channel” if you want to change from the defaults. The default settings are; Network = Enable, ESSID = NetComm Wireless, Default Channel = Auto

6.Choose the Encryption type if necessary. Options are;

-Off – No Encryption

-64 Bit Encryption

-128 Bit Encryption

-Wi-Fi Protected Access (TKIP)

-Wi-Fi Protected Access 2 (AES-CCMP)

-WPA Mixed Mode.

YML14WN	ADSL2+ Wireless N150 Modem Router User Guide
www.netcomm.com.au	15