NordicTrack N150 manual Installation & Setup, Configuration Procedures

NetComm Gateway Series - ADSL2+ Wireless N150 Modem Router

Installation & Setup

Follow each step carefully and only go to the next step once you have completed the previous step.

Connection of the ADSL2+ Wireless N150 Modem Router

1.Connect the supplied RJ-11 cable to the ADSL port on the back of your router to the phone port that supplies your ADSL.

2.Connect the supplied RJ-45 Ethernet cable from one of the LAN ports on the back of the router to your computer

3.Connect the supplied power adapter to your router and press the on/off button to power the router on.

Computer

Phone port

Power Power

Adapter Point

Configuration Procedures

Before beginning the NB14WN configuration, please kindly configure your PC as below, to enable automatic IP address / DNS Server.

For Windows 98SE/ME/2000/XP

1. Click on “Start” -> “Control Panel” (in Classic View). In the Control Panel; double click on “Network Connections” to continue.

2. Single RIGHT click on “Local Area connection”, then click “Properties”.

YML14WN	ADSL2+ Wireless N150 Modem Router User Guide
www.netcomm.com.au	9