III
DIRECT CONNECT WITH THE
PORTA PRINTER PP2000D
The Direct Connect feature saves you time and gives you a better connection. you can use your Porta Printer without having to place the telephone handset into the acoustic cups. It also gives you the choice of dialing from the key- board or from numbers stored in the Phone Directory (see page 17 for information on storing num- bers in the Directory.)
To connect your Porta Printer to your telephone line, plug one end of your modular telephone cord into the telephone wall jack. Plug the other end into either hack on the back of your Porta Printer.
After changing to Direct Connect, it is necessary to press the [SPACE BAR] or [SHIFT] + [DIAL] to connect with the telephone line.
KEYBOARD DIALING
Turn the Power Switch ON.
The Porta Printer will automatically change to and remain in Direct Connect when you have your PP2000D plugged into the telephone line.
PRESS: |
|
SHIFT + DIAL | PLEASE WAIT TDD is now ready to dial |
If there is no dial tone, the screen will display.
LINE NOT CONNECTED
DIAL TONE
LINE NOT CONNECTED
5 5 5 1 2 3 4 | 5551234 |
|
|
Check the phone line and press [SHIFT]+[DIAL] again.
Dial tone is detected.
TDD is now ready to dial. If you make a mistake, use the [BACK- SPACE] to correct.
The number is displayed and dialed after you press the [RETURN] key.
RETURN
12