Krown Manufacturing 2000 manual MULTI-WIDE Printing Feature

VMULTI-WIDE PRINTING FEATURE

The Multi-Wide printing feature of your Porta Printer allows you to select three sizes of letters and numbers that are printed on your TDD. These three sizes are:

Normal: 20 characters/line

Condensed:	24 characters/line. These characters are a little smaller
	than the Normal-Size characters. They may be used if
	you wish to save paper by printing smaller characters.
Wide:	12 characters/line. These characters are very large and
	bold and are useful for people who have difficulty
	reading the Normal-Size characters.

PRESS:

To select Condensed Print, press and hold the [CTRL] key and press [C].

CTRL + C CONDENSED PRINT is display.

To select Wide Print, press and hold the [CTRL] key and press [W].

CTRL	+	W	WIDE PRINT	is displayed.
To select Normal Print, press and hold the [CTRL] key and press [N]
	+
CTRL		N	NORMAL PRINT	is displayed.

NOTE: When the Porta Printer with the Multi-Wide printing feature prints in ASCII, the print will always be condensed Print. The Porta Printer will remember the print width that you selected. For example, if you select Condensed Print and

then turn your Porta Printer off, your Porta Printer will be in Condensed Print mode when you turn it on again.

If you have the Porta Printer with large display (PP2000DLVD) and want to turn on/off the printer, press [CTRL] + [P].

TEST MESSAGE

A test message is built into the Porta Printer (PP2000D) to use when testing the printer on the machine. To test the printer:

CTRL + Q THE QUICK BROWN FOX

To end the test message.

CTRL	+	9	JUMPS OVER THE LAZY
	+
CTRL		T	TEST PATTERN

The test message is displayed and printed.

The Multi-Wide test message
will now print.	17