VII
USING YOUR PORTA PRINTER 2000D WITH A WIRELESS PHONE
If you order your PP2000D with wireless option, use the supplied cable to connect your TDD direct to a select digital cell phone, or a cordless phone with 2.5mm headset jack. When purchasing a cell phone and service for your PP2000D, make sure you get a TDD compatible unit or look for the TDD- cell phone symbol.
OR
MAKING A CELLULAR CALL WITH YOUR PP2000D
Always charge the TDD and your cell phone in full before use. Make sure you get a strong signal from your provider and your TDD is off. Setup your cell phone to work in TDD mode.
1.Connect the cable from the cell phone to the TDD
2.Turn on your TDD
3.Select TDD mode on your cell phone (refers to your cell phone manual for more detail).
4.Dial the number you are calling on the cell phone.
5.If the other party’s TDD pick up, the PP2000D will display text and the conversation has been started.
ANSWERING A CELLULAR CALL
Make sure to turn the Ringer of your cell phone to vibrate mode. If your battery doesn’t support this mode, you may need to order a vibrate battery from your cell phone provider.
1.If the cell phone vibrates, you have an incoming call, connect your PP2000D using the cable that come with your TDD to the cell phone.
2.Answer the call on your cell phone (usually your press “talk” or “send” button on your cell phone. Refer to your instruction book for how to answer a call for your phone.)
3.Turn on your PP2000D and type your greeting message.
When you are ready to hang up, turn off the PP2000D and press the button to hang up the call of your cell phone.
NOTE: Connecting your PP2000D to a wireless phone is an option. Please call your Krown’s representative to
have it installed. Cellular is not included. | 19 |
|