La Crosse Technology WS-7013TWC quick start

Page 14

1.The Indoor Temperature Station comes with the table stand already mounted. If you wish to use the table- stand, all that is required is to place the Indoor Temperature Station in an appropriate location.

2.To wall mount, remove the table stand. To do this, pull down on the stand from the rear and rotate forward.

a)Fix a screw (not included) into the desired wall, and place the Temperature Station onto the screw using the hanging hole on the backside. Gently pull the Station down to lock the screw into place.

11

Image 14
Contents Quick Start for your WS-7013U WS-7013U Wireless 433 MHz Temperature Station Table of Contents Inventory of Contents Quick Setup Detailed Setup Guide Battery Installation Outdoor II. Time Setting the Time IV. Features Minimum and Maximum Temperatures Adding Additional Remote Control Senders Optional Resetting the Minimum and Maximum TemperaturesPage Page Mounting Remote Control Sender Temperature StationPage Troubleshooting Page Maintenance and Care Instructions Specifications Measuring TemperaturesWarranty Information Page Page Support@lacrossetechnology.com FCC Disclaimer