La Crosse Technology WT-5350 Programming Sequence, Time Setting, Function Buttons, Date Setting

A.PROGRAMMING SEQUENCE

1.Time Zone Setting

2.Hour Setting

3.Minute Setting

4.Year Setting

5.Month Setting

6.Day Setting

7.12/24-hour Mode

8.Daylight Saving Time On/Off

R A D I O C O N T R O L L E D

DATE

GB P.10

3.From -5h to -8h, a US map with the highlighted time zone will also be displayed to the right of the time display.

4.Press the "AL" button to move to the hour setting or press the "SNOOZE" button to confirm the time zone and return to the display mode.

D. TIME SETTING

Note: When the WWVB signal is found, that time will over-ride the manually set time.

1.Hold down the "MODE/+" button for 2 seconds (the selected time zone

B. FUNCTION BUTTONS

There are 5 function buttons located on the front of the Projection Alarm. The function buttons are labeled: AL, light intensity icon, light direction icon, MODE/+, and SNOOZE (the top bar).

C. TIME ZONE SETTING

1.Hold down the "MODE/+" button for 2 seconds, the time zone ("-5" default) will flash in the Date LCD.

2.Press the "MODE/+" button to select the appropriate time zone. There are 13 time zones to choose from (based relative to the international time standard of GMT ("Greenwich Mean Time").

P.11 GB

will flash), press the "AL" button once until the hour flashes in the time LCD.

2.Press the "MODE/+" button to select the hour.

3.Press the "AL" button to move to the minute setting.

Note: When setting the hour, "PM" will appear to the left of the hour display, if it is "AM" nothing will appear.

4.Press the "MODE/+" button to select the minutes.

5.Press the "AL" button to confirm the time setting and advance to manually set the date or press the "SNOOZE" button to confirm the time and return to the display mode.

E.DATE SETTING

Note: When the WWVB signal is found, that date will over-ride the manually set date.