An upload process screen is displayed for a moment and then the Configure dialog box appears:
Figure 55. Configure dialog box - IP addresses
3.Select the IP Addresses tab.
4.Set the IP addresses by doing one of the following:
v Select the check box if you want the addresses to be set by a Dynamic Host Configuration Protocol (DHCP) or BootP server.
v Specify the addresses individually.
5.Click OK to save the settings.
Setting an access password
Web TLC limits access to the system by means of passwords set on the configuration screen. Web TLC passwords allow for two levels of system access:
vLevel 1 access allows operator viewing of library status only.
vLevel 2 access allows full control, permitting the user to move tapes and modify library configuration settings.
Note: Level 2 access can be disabled entirely.
To set an access password, complete the following procedure:
1.Establish communications with the library.
564560SLX Tape Library: User’s Guide
