1 | SCSI terminator | 3 | Jumper cable |
2 | To library controller card | 4 | To host system |
Figure 17. Two tape drives single host
Two tape drives on a dual host system
Figure 18 shows a typical SCSI cable configuration for a library with two tape drives installed using a dual host system.
1 | SCSI terminator | 4 | To host (drive 2) |
2 | To library controller card | 5 | SCSI terminator |
3 | To host (drive 1) |
|
|
Figure 18. Two tape drives dual host
Chapter 2. Installation 17
