Tomove a cartridge, complete the following procedure:
1. Touchthe Source box or Source Element Type from the Move Media screen.
The Source box will change from gray to an active state as shown in Figure35.
2. From the Source Element Typearea, select the element type you want to move.
Drive 2 is used for this example.
3. Touchthe Destination box on the Move Media screen. The Destination box
will change from gray to an active state as shown in Figure36.
4. From the Destination Element Typearea, select the element type you want to
move media to. Continue selecting the destination option until the desired
Figure34. Move Media screen
Figure35. Move Media screen (source)
Figure36. Move Media screen (destination)
Chapter4. Operation 29