Multiple libraries on a dual host system
Figure 20 shows a typical SCSI cable configuration for a library with multiple libraries and tape drives installed using a dual host system.
1 | 2 | 3 | 4 | 5 | 6 | 7 | WAN |
1 | To host system |
2 | SCSI terminators |
Figure 20. Dual host multi-unit system
Turning on your library
Use the following instructions to apply power to the library:
1.Connect the supplied power cord to the ac receptacle located on the back of the library module as shown in Figure 21 on page 20.
Chapter 2. Installation 19
