IBM 4560SLX warranty Attaching the slide members to the library, Rack mounting the library

1	Inner slide member	8	Clip or cage nut (eight 8-32)
2 Hex screw (eight M4 x 8mm)		9	Screw (eight 10-32 x 5/8)
3	Front mounting bracket	10	Clip or cage nut (two 10-32)
4	Rear mounting bracket	11	Ball bearing slide member
5	Outer slide member	12	Sticker
6	Middle slide member	13	Thumbscrew (two 10-32)
7 Screw, flat washer, lock washer, nut (eight sets)		14	Door latch insert

Note: If you are installing the library on the IBM Netbay42 Enterprise rack, clip nuts (
8 and
10) are provided. If you are installing a Netbay11, Netbay25, or Netbay42 standard rack, cage nuts are provided.

Figure 11. Rack mounting the library

Attaching the slide members to the library

To attach the slide members to the library, complete the following procedures:

1.Remove the inner slide member (
1) from each rack-mount slide.

2.Attach the inner slide members to the sides of the chassis using eight hex screws (
2).

124560SLX Tape Library: User’s Guide