Setting Snmp traps, Setting e-mail addresses | IBM 4560SLX specification

2.On the Configure screen, select the Access tab. The Access tab panel is displayed.

3.Place the text cursor into a level field and type in the password.

4.Enable or disable Level 2 access.

5.Enter the library name.

6.Click OK to save the settings.

Note: The Access tab panel permits you to specify a familiar, mnemonic name for your library. This name will be displayed on many pages of your Web TLC site.

Setting SNMP traps

To set SNMP traps, complete the following procedure:

Note: Configuration addresses are network specific. Contact your network system administrator for the appropriate values. These settings enable the Web TLC to send system events asynchronously to the network.

1.Establish communications with the library.

2.On the Configure screen, select the SNMP Traps tab.

The SNMP tab panel displays fields that enable you to enter the IP addresses of up to four hosts that can receive SNMP traps.

3.Enter the appropriate values in the fields.

4.Click OK to save the settings.

Setting e-mail addresses

To set e-mail addresses, complete the following procedure:

1.Establish communications with the library.

2.On the Configure screen, click the E-Mail Addresses tab. The E-Mail Addresses tab panel is displayed.

3.Enter the name or IP address of the SMTP mail server.

4.Enter up to four e-mail addresses.

These addresses will be e-mailed upon notification of specific system events.

5.Click OK to save the settings.

Setting remote FTP server parameters

These settings enable the user to download firmware to the Web TLC or to the library using a remote FTP site.

1.Establish communications with the library.

2.On the Configure screen, click the Remote FTP Server tab. The Remote FTP Server tab panel is displayed.

3.Enter the necessary server information.

If the default name or address has been updated or is unavailable, contact IBM Technical Support.

4.Click OK to save the settings.

Chapter 7. Using the NeoCenter utility 57

Image 67

IBM 4560SLX warranty Setting Snmp traps, Setting e-mail addresses, Setting remote FTP server parameters

Contents

4560SLX Tape Library User’s Guide Page 4560SLX Tape Library User’s Guide Page Contents Appendix C. Specifications Safety Vi 4560SLX Tape Library User’s Guide Product Registration Preface Viii 4560SLX Tape Library User’s Guide Configurations ContentsIntroduction Front panel Library interfaces Magazine doors Library Indicators Mail slots Magazines Power supply Power supply Library controller board Tape drives Library controller adapter and PCI slots Robotics Library robotics Multi-module library systems Introduction 10 4560SLX Tape Library User’s Guide Setup Installation Rack mounting the library Attaching the slide members to the library Attaching the slide members to the rack Installing the slide members Installing the library module Installing a library in the rack Scsi interface connectors Scsi cable configurationsInterface cable specifications Two tape drives on a single host system Scsi configuration Two tape drives on a dual host system Multiple libraries on a single host system Dual host multi-unit system Turning on your library Powering library module Setting a Scsi ID Library configuration Scsi ID selection screen Drive 1 Bus 3 Data Field screen Setting up reserved tape cartridge slots Slot numbering Reserved slots numeric keypad 26 4560SLX Tape Library User’s Guide Technical support information Using the touch screenMail Slot Access left magazine only Operation Move Media Magazine Access Move Media screen Menu LCD contrast controls Option Description Describes the available Library options Describes the available Scsi options Definition Option and default description Default value SCSI-3 Report on Unsolicited Request Sense Reports Conditionally Generate Recovered ErrorUnconditionally Generate Recovered Error Generate Unit Attention Reports information Describes the available Network options Utilities Edit Options Security level Access Edit Scsi Options screen Status Online Using tape cartridges PowerRemoving magazines Inserting cartridges into a magazine Using the mail slot left magazines only Left magazine mail slot Bar code labels Supported media MaintenanceRunning a cleaning cartridge Automatically running a cleaning cartridge Running a cleaning cartridge from the mail slot Manually running a cleaning cartridge Replacing a cleaning cartridge in the right magazine Replacing a cleaning cartridge in a reserved slotReplacing a cleaning cartridge in the mail slot 46 4560SLX Tape Library User’s Guide Platform problems TroubleshootingError recovery procedures ERPs ERP code Procedure/Description Error Recovery Message Fault symptom codes FSCs 301B Picker Jammed on Stow 310F Picker Retries Exceeded Drive removal failed 7010 HotPlug statue update failed FSC ERP 54 4560SLX Tape Library User’s Guide Setting IP addresses Using the NeoCenter utilityEstablishing communication with your host Configure dialog box IP addresses Setting an access password Setting e-mail addresses Setting Snmp trapsSetting remote FTP server parameters Setting the drives Setting Scsi parametersSetting the Scsi identification Setting library parameters Upload Data From Library prompt Download Data to Library prompt Downloading data Rebooting the library 62 4560SLX Tape Library User’s Guide Web TLC World Wide Web accessible Operation Web TLC access Inventory Display Logical / Physical History Functions Removing tape-drive blank panel Appendix A. Adding a tape drive Installing a tape drive Appendix B. Adding a library module Planning your installation Positioning the modules Router installationCartridge elevator router Cartridge elevator router Cartridge elevator router installed Installing the cartridge elevator Drive shoe and blank panel removal Cover plate removal Components Cartridge elevator extension assembly Factory assembled cartridge elevator Assembly Cartridge elevator bottom plate Tensioner ramp/idler pulley zero point Tensioner ramp/idler pulley Tie bar installation Timing belt installation base section Timing belt to belt block Module configuration Powering up the library Configuring the primary master module Module Configuration screen Configuring slave modules Cabling and interface connections Module configured as a slave Four module library cabling Verifying firmware level of the slave modules Fail-over initiation Fail-over operationCartridge elevator terms Cabling considerations for fail-over operation Local fail-over to secondary master initiation Restoring normal operation Remote fail-over to primary master Hardware Appendix C. SpecificationsOperational specifications 4560SLX Tape Library Physical characteristics 4560SLX Tape Library Electrostatic discharge SafetyEnvironmental Electromagnetic emissions Shock Temperature, humidity, and altitude Physical drop test packaged no damage Primary powerVibration Transit/storage packed no damage Frequency limits Power requirementsPower line disturbance Voltage limits Input supply Installation considerationsCooling Rack mounting Description Part number Appendix D. Field replaceable units FRUs 98 4560SLX Tape Library User’s Guide Warranty period Three years Appendix E. Warranty informationWarranty period Service and support Click Support Phone List Support 24 hours a day, 7 days a week Warranties of ANY Kind 102 4560SLX Tape Library User’s Guide Governing Law Part 2 Country-unique Terms Asia Pacific Australia Hong Kong and Macau Following Terms Apply to ALL Emea Countries Following Terms Apply to the Country Specified Italy Following item is added to this paragraph 110 4560SLX Tape Library User’s Guide Appendix F. Notices Deutsche EMV-Direktive electromagnetische Verträglichkeit Trademarks Europen Union EMC directive Unione Europea Directiva EMC Conformidad électromagnética Appendix F. Notices 116 4560SLX Tape Library User’s Guide Page Part Number 59P6690