TX61U-IT Wireless Solar-Powered Outdoor Sensor:
•The
•
•Stores solar power for continuous operation
•Batteries are a
•Wall hanging or free standing
•Outdoor measurement range:
with 0.1°C resolution. “OFL” displayed if outside range
•Outdoor temperature update rate: Every 8 seconds
•915 MHz Wireless range:
Up to 200 Ft. (60.96m) open air
•Dimensions: 1.7"L x .93"W x 3.94"H (43 x 100 x 23.5 mm)
•Signal reception and
•Operating voltage: 2.5V or higher than 2.5V
Initial Set Up and Wireless Synchronization
1.Initialize the Sensor
It is important to allow sufficient light
to reach the solar
panel while
activating the sensor. 
Make sure the lights
are on in the setup room and the solar panel is facing a 60W light bulb or brighter - do not cover with hands or other objects. To begin the set up process, use the included plastic reset rod to GENTLY PUSH the reset button once in the hole on the front of the sensor with the LCD/solar panel facing a light source. All LCD segments will light up briefly. The code number and the security code (example: "20") of the model will be displayed sequentially. Next, the battery voltage will appear on the LCD. Then the current temperature will appear on the sensor's LCD and it will start to transmit the wireless temperature signal.
Note: Sensor battery voltage must be higher than 2.5V to maintain normal operation. When the voltage of the
Page 3 of 12