DST Daylight Saving Time Setting | La Crosse Technology WT-5432

-4h	Atlantic Time
-5h	Eastern Time (default setting)
-6h	Central Time
-7h	Mountain Time
-8h	Pacific Time
-9h	Alaskan Time
-10h	Hawaiian Time
-11h, -12h	Next two time zones West of HAW
0h	Greenwich Mean Time
-1h, -2h, -3h	Three time zones West of GMT

4.From –5h to –8h, a US map with the highlighted time zone will also be displayed to the right of the time display.

5.Press and release the “SET” button to confirm the time zone setting, and to advance to DST (Daylight saving time) setting.

D.DST (Daylight Saving Time) Setting

Note: The DST default is “On”, meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST “OFF”.

1.Press and release the “+” button to turn the DST off, as will be indicated by the display of “OFF” in the time LCD.

2.Press and release the “SET” button to confirm the DST setting, and to advance to select the length of the snooze.

E.Adjustable Snooze Time

Note: The snooze length can be adjusted from 1 minute to 59 minutes. This duration refers to the length of time the alarm will be disabled when the “SNOOZE” bar is pressed. If set to “0”, activating the snooze will turn off the alarm for 24 hours.

1.Press and release the “+” button to advance the snooze time from 0 (off ) to 59 minutes.

2.Press and release the “SET” button to confirm the snooze setting, and to advance to manually set the time.

F.Time Setting

Note: When the WWVB signal is found that time will over-ride the manually set time.

1.Press and release the “+” button to select the hour.