After completion of the above described procedures in “Setting up” the manual setting modes can be entered by pressing and holding the SET key for 5 seconds. The following settings can now be programmed:
• |
| Default (Factory) Setting |
LCD contrast setting | 4 | |
• | Time zone setting | |
• | DST ON/OFF | ON |
• | ON | |
• | Language display setting | ENG (English) |
• | Manual time setting (Hour then Minute) | 12 (hour), 00 (minute) |
• | Year setting | 2004 |
• | Month setting | Jan (January) |
• | Date setting | 1 |
LCD CONTRAST SETTING
After entering the manual setting mode as described above, the LCD contrast can be set between 0 and 7.
1.Press and hold the SET key for 5 seconds.
2.LCD will be displayed in the lower display and a number will flash to the right of the word
LCD.
3.Press and release the + key to select the desired LCD contrast.
4.Press and release the SET key to confirm the LCD contrast and continue to the Time Zone setting.
TIME ZONE SETTING
The time zone can be set between the
1.The time zone will start flashing (Default setting
4