Troubleshooting

Problem:	The LCD is faint.
Solution:	1)	Replace batteries.
Problem:	“OFL” appears in LCD.
Solution:	1)	Follow Reset directions. (Total rainfall accumulation has
	exceeded 999.99in.)
Problem:	“---” Appears in LCD (rain monitor has lost signal from gauge)
Solution:	1)	Follow reset directions.
	2)	Distance the Rain Monitor or Rainfall Transmitter at least 6 feet
	(2m) away from interfering sources on a 433 MHz signal
	(computers, TV sets, headphones, speakers, etc.).
	3)	Move receiver away from metal window frames.
	4)	Neighbors using 433 MHz devices can interfere also.
Problem:	Need to reset the bar graph (EEPROM Rain Monitor memory)
Solution:	1)	Remove batteries, and follow instructions in section III, under
	Features & Operations.
Problem:	Rainfall amount is not correct.
Solution:	1)	Manually change the rain multiplicator number to 105, following
	instructions in section II, under Features & Operations.

Note: For any questions not answered, contact La Crosse Technology with the contact information found at the end of this instructional manual.