Magicard Printer

INSTRUCTIONS FOR REPLACEMENT OF PRINTHEAD AND PRINTHEAD ASSEMBLIES

WARNING - The Magicard colour printer contains hazardous voltages.

CAUTION - The following procedures involve contact with Electrostatic Sensitive Devices. All Precautions for handling Electrostatic Sensitive Devices should be followed at all times, including the use of a grounded wrist strap.

HOW TO USE THESE

INSTRUCTIONS

The following procedures are intended to be used for replacement of Magicard Thermal Printheads and Magicard Thermal Printhead Assemblies.

If replacing a Thermal Printhead Assembly do NOT carry out those parts of this document written in italics . These procedures, for head angle adjustment, require some previous Magicard product training or experience, and must not be undertaken by end users. Therefore end users are supplied with replacement Printhead Assemblies, which have already been adjusted for correct head angle.

3461/07/01 ISSUE 2

PRINTHEAD INSTALLATION & COMMISSIONING SPEC.

DCR No. 26106